Author Topic: [SOLVED] Firewall rule question=>Blocking Incoming Traffic 4 Single Destination (Read 3836 times)

minime · « **on:** November 13, 2016, 06:04:32 pm »

Hi guys,

I don't quite understand that my added block rule (see attached) doesn't only block the traffic for the specified destination (it's my NAS), but all traffic into my LAN. I tried a dozen different combinations (also with Floating Rules) and also made sure that I did reset the states and did a reboot afterwards...

What am I missing?

Thanks,
minime

bartjsmit · « **Reply #1 on:** November 13, 2016, 06:44:10 pm »

If you are blocking traffic to a single host, the network mask is /32.

Bart...

minime · « **Reply #2 on:** November 13, 2016, 06:50:23 pm »

Many thanks!!

Author Topic: [SOLVED] Firewall rule question=>Blocking Incoming Traffic 4 Single Destination (Read 3836 times)

minime

[SOLVED] Firewall rule question=>Blocking Incoming Traffic 4 Single Destination

bartjsmit

Re: Firewall rule question => Blocking Incoming Traffic for Single Destination

minime

Re: Firewall rule question => Blocking Incoming Traffic for Single Destination