OPNsense Forum
English Forums => General Discussion => Topic started by: minime on November 13, 2016, 06:04:32 pm
-
Hi guys,
I don't quite understand that my added block rule (see attached) doesn't only block the traffic for the specified destination (it's my NAS), but all traffic into my LAN. I tried a dozen different combinations (also with Floating Rules) and also made sure that I did reset the states and did a reboot afterwards...
What am I missing?
Thanks,
minime
-
If you are blocking traffic to a single host, the network mask is /32.
Bart...
-
:-[
Many thanks!!