Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - devhunter55

#1
same here ==>

OPNsense 25.1.5_5-amd64
FreeBSD 14.2-RELEASE-p2
OpenSSL 3.0.16
#2
Gibt einen workaround .. man scrollt mit der Tastatur und wählt das Subject mit der "space" Taste aus .. danach wird ein Hacken gesetzt .. klappt ab und zu mit der Maus .. aber nicht immer
#3
that worked, thx Franco

Cheers
Mike
#4
Franco .. you probably mean this fix ? :-)

*****************************************

You can now install the latest snapshot via:

# opnsense-revert -z os-etpro-telemetry

(it's safe since it only includes the fix)


Cheers,
Franco
************************************
#5
updated to opnsense 24.7_9  - no telemetry status is shown in the Dashboard.

#6
genau dieses Problem habe ich auch ...

OPNsense 24.7_9-amd64
FreeBSD 14.1-RELEASE-p2
OpenSSL 3.0.14

Es lassen sich keine Widgets mehr hinzufügen
#7
@tracerrx - that's a very good Information, indeed - many thx for it !
#8
After running into these issues, i did revert to OPNsense 22.1.1_3.

This version is running very stable - no flapping interfaces anymore.

I'm thinking to wait for a more stable Freebsd version with running Intel drivers.
May be with FreeBSD 13.1 or/and Opnsense 23.1.x ?
#9
this may be true in my case, too (but i think - as long we don't know the reason for - it is an assumption):

root@opnsense:~ # sysctl -a | grep -E 'dev.(igb|ix|em).*.%desc:'

dev.igb.5.%desc: Intel(R) I210 (Copper)
dev.igb.4.%desc: Intel(R) I210 (Copper)
dev.igb.3.%desc: Intel(R) I210 (Copper)
dev.igb.2.%desc: Intel(R) I210 (Copper)
dev.igb.1.%desc: Intel(R) I210 (Copper)
dev.igb.0.%desc: Intel(R) I210 (Copper)


---------------------------------

Intel® Ethernet Controller I210
I210 controllers support speeds up to 1GbE on a single port with advanced features such as Audio-Video Bridging (AVB), IEEE 802.1AS precision timestamping, Error Correcting Code (ECC) Packet Buffers, and Enhanced Management Interface options.
#10
@Franco - yes - we would all appreciate if this could fixed soon  ;)

(knocked out since 22.1.1 (with UNBOUND 1.15.0))
#11
Thx opnfwb for this very good advice !

So, yes.. the environment is very productive and thx also the good hint to be very careful, when enabling them the very 1rst time (to be prepared when the interface(s) is/are unresponsive).

I think - i've got two opnsense hw, i could test it on the one - if it would completely fail, i could switch to the 2ncd at least.

Best
Mike
#12
Dear all

i read a lot about advantages about having flow control disabled - but i'm not sure if this might be some kind of mandatory for some use cases (like suricata or ISP WAN IP) ?

I read a forum advice from a member that Flowcontrol enabled on some device solved his problem, so i'm unsure, what to do (let flowcontrol enabled on all nics or not).

"Turns out it was a problem with flow control. Once I enabled flow control for only my LAN SFP+ connection on my firewall to the switch and left flow control off for the WAN interface on the firewall both 1G and 10G clients were getting proper WAN speeds on the switch.

Remember ethernet speed mismatch can cause problems, use flow control to resolve them!
"


my current opnsense settings:

root@opnsense:~ # sysctl -a | grep dev.igb| grep -i control
dev.igb.5.rx_control: 4194304
dev.igb.5.device_control: 136053313
dev.igb.5.eee_control: 1
dev.igb.4.rx_control: 4194304
dev.igb.4.device_control: 136053313
dev.igb.4.eee_control: 1
dev.igb.3.rx_control: 4194304
dev.igb.3.device_control: 135791169
dev.igb.3.eee_control: 1
dev.igb.2.rx_control: 4194304
dev.igb.2.device_control: 136053313
dev.igb.2.eee_control: 1
dev.igb.1.rx_control: 71598082
dev.igb.1.device_control: 1075577409
dev.igb.1.eee_control: 1
dev.igb.0.rx_control: 71598082
dev.igb.0.device_control: 1075577409
dev.igb.0.eee_control: 1

Thx all for help & ideas .. and Happy Easter  :D
#14
Thx all for the very good hint about "mac spoofing" .. i did not have got the chance to test it.
1rst of all, i wrote my ISP if "mac spoofing" is mandatory from his side.

on my side - UNBOUND is not working anymore since 22.1.2 or since UNBOUND version: unbound 1.15.0

Yesterday, i gave it a try again - and upgraded to 22.1.6.

I've got a lot of UNBOUND "overrides" in place & BlockLists.
I did disable the BlockLists - but this didn't help.

DNS is not working anymore - it seems that the DNS Resolver will switch from offline to online & vice versa in a very short time (what others called "flapping")

between i can connect to the WEB for a short time (but resolution is very, very slow).
..getting a WAN DHCP ip & and then it disappears again.

The whole machine gets very hot, CPU & unbound is about 100% - restart UNBOUND does not fix this issue.

Fortunately i'm using ZFS, so Restore is quick & easy - but full RESTORE was needed in every upgrade after version: 22.1.1 (with UNBOUND 1.15.0).

I tried the upgrades also with different hardware - same result - no chance to get UNBOUND working again - and DNS - of course is fundamental.

messages:
------------
<11>1 2022-04-15T20:59:19+02:00 opnsense-host opnsense 88624 - [meta sequenceId="32"] /usr/local/etc/rc.linkup: DEVD: Ethernet attached event for dynamic wan(igb1)
<27>1 2022-04-15T20:59:19+02:00 opnsense-host dhclient 96268 - [meta sequenceId="33"] dhclient already running, pid: 86990.
<26>1 2022-04-15T20:59:19+02:00 opnsense-host dhclient 96268 - [meta sequenceId="34"] exiting.
<11>1 2022-04-15T20:59:19+02:00 opnsense-host opnsense 88624 - [meta sequenceId="35"] /usr/local/etc/rc.linkup: The command '/sbin/dhclient -c '/var/etc/dhclient_wan.conf' -p '/var/run/d
hclient.igb1.pid' 'igb1'' returned exit code '1', the output was 'dhclient already running, pid: 86990. exiting.'
<11>1 2022-04-15T20:59:19+02:00 opnsense-host opnsense 88624 - [meta sequenceId="36"] /usr/local/etc/rc.linkup: Accept router advertisements on interface igb1
<13>1 2022-04-15T20:59:19+02:00 opnsense-host dhcp6c 3104 - [meta sequenceId="37"] RTSOLD script - Sending SIGHUP to dhcp6c
<11>1 2022-04-15T20:59:19+02:00 opnsense-host opnsense 88624 - [meta sequenceId="38"] /usr/local/etc/rc.linkup: ROUTING: entering configure using 'wan'
<11>1 2022-04-15T20:59:20+02:00 opnsense-host opnsense 88624 - [meta sequenceId="39"] /usr/local/etc/rc.linkup: ROUTING: IPv4 default gateway set to lan
<11>1 2022-04-15T20:59:20+02:00 opnsense-host opnsense 88624 - [meta sequenceId="40"] /usr/local/etc/rc.linkup: ROUTING: skipping IPv4 default route
<11>1 2022-04-15T20:59:20+02:00 opnsense-host opnsense 88624 - [meta sequenceId="41"] /usr/local/etc/rc.linkup: ROUTING: IPv6 default gateway set to wan
<11>1 2022-04-15T20:59:20+02:00 opnsense-host opnsense 88624 - [meta sequenceId="42"] /usr/local/etc/rc.linkup: ROUTING: skipping IPv6 default route
<13>1 2022-04-15T20:59:20+02:00 opnsense-host opnsense 88624 - [meta sequenceId="43"] plugins_configure ipsec (,wan)
<13>1 2022-04-15T20:59:20+02:00 opnsense-host opnsense 88624 - [meta sequenceId="44"] plugins_configure ipsec (execute task : ipsec_configure_do(,wan))
<13>1 2022-04-15T20:59:20+02:00 opnsense-host opnsense 88624 - [meta sequenceId="45"] plugins_configure dhcp ()
<13>1 2022-04-15T20:59:20+02:00 opnsense-host opnsense 88624 - [meta sequenceId="46"] plugins_configure dhcp (execute task : dhcpd_dhcp_configure())
<13>1 2022-04-15T20:59:20+02:00 opnsense-host opnsense 88624 - [meta sequenceId="47"] plugins_configure dns ()
<13>1 2022-04-15T20:59:20+02:00 opnsense-host opnsense 88624 - [meta sequenceId="48"] plugins_configure dns (execute task : dnsmasq_configure_do())
<13>1 2022-04-15T20:59:20+02:00 opnsense-host opnsense 88624 - [meta sequenceId="49"] plugins_configure dns (execute task : unbound_configure_do())
<11>1 2022-04-15T20:59:20+02:00 opnsense-host opnsense 88624 - [meta sequenceId="50"] /usr/local/etc/rc.linkup: warning: ignoring missing default tunable request: debug.pfftpproxy
<13>1 2022-04-15T20:59:24+02:00 opnsense-host dhcp6c 64283 - [meta sequenceId="51"] RTSOLD script - Sending SIGHUP to dhcp6c
<27>1 2022-04-15T20:59:36+02:00 opnsense-host upsmon 39698 - [meta sequenceId="52"] UPS [ups@localupsip]: connect failed: Connection failure: Operation timed out
<13>1 2022-04-15T20:59:49+02:00 opnsense-host configctl 68544 - [meta sequenceId="53"] event @ 1650049188.54 msg: Apr 15 20:59:48 opnsense-host config[87361]: [2022-04-15T20:59:48+02
:00][info] config-event: new_config /conf/backup/config-1650049188.5364.xml
<13>1 2022-04-15T20:59:49+02:00 opnsense-host configctl 68544 - [meta sequenceId="54"] event @ 1650049188.54 exec: system event config_changed
<27>1 2022-04-15T21:00:56+02:00 opnsense-host upsmon 39698 - [meta sequenceId="1"] UPS [ups@localupsip]: connect failed: Connection failure: Operation timed out
<29>1 2022-04-15T21:00:56+02:00 opnsense-host upsmon 39698 - [meta sequenceId="2"] UPS ups@localupsip is unavailable
<11>1 2022-04-15T21:01:19+02:00 opnsense-host configctl 87822 - [meta sequenceId="3"] error in configd communication  Traceback (most recent call last):   File "/usr/local/sbin/configctl
", line 66, in exec_config_cmd     line = sock.recv(65536).decode() socket.timeout: timed out
<11>1 2022-04-15T21:01:19+02:00 opnsense-host opnsense 99032 - [meta sequenceId="4"] /usr/local/etc/rc.linkup: DEVD: Ethernet detached event for dynamic wan(igb1)
<11>1 2022-04-15T21:01:19+02:00 opnsense-host opnsense 99032 - [meta sequenceId="5"] /usr/local/etc/rc.linkup: Clearing states for stale wan route on igb1
<11>1 2022-04-15T21:01:20+02:00 opnsense-host opnsense 16955 - [meta sequenceId="6"] /usr/local/etc/rc.linkup: DEVD: Ethernet attached event for dynamic wan(igb1)
<27>1 2022-04-15T21:01:20+02:00 opnsense-host dhclient 23026 - [meta sequenceId="7"] dhclient already running, pid: 86990.
<26>1 2022-04-15T21:01:20+02:00 opnsense-host dhclient 23026 - [meta sequenceId="8"] exiting.
<11>1 2022-04-15T21:01:20+02:00 opnsense-host opnsense 16955 - [meta sequenceId="9"] /usr/local/etc/rc.linkup: The command '/sbin/dhclient -c '/var/etc/dhclient_wan.conf' -p '/var/run/dh
client.igb1.pid' 'igb1'' returned exit code '1', the output was 'dhclient already running, pid: 86990. exiting.'
<11>1 2022-04-15T21:01:20+02:00 opnsense-host opnsense 16955 - [meta sequenceId="10"] /usr/local/etc/rc.linkup: Accept router advertisements on interface igb1
<13>1 2022-04-15T21:01:20+02:00 opnsense-host dhcp6c 30500 - [meta sequenceId="11"] RTSOLD script - Sending SIGHUP to dhcp6c
<11>1 2022-04-15T21:01:20+02:00 opnsense-host opnsense 16955 - [meta sequenceId="12"] /usr/local/etc/rc.linkup: ROUTING: entering configure using 'wan'
<11>1 2022-04-15T21:01:20+02:00 opnsense-host opnsense 16955 - [meta sequenceId="13"] /usr/local/etc/rc.linkup: ROUTING: IPv4 default gateway set to lan
<11>1 2022-04-15T21:01:20+02:00 opnsense-host opnsense 16955 - [meta sequenceId="14"] /usr/local/etc/rc.linkup: ROUTING: skipping IPv4 default route
<11>1 2022-04-15T21:01:20+02:00 opnsense-host opnsense 16955 - [meta sequenceId="15"] /usr/local/etc/rc.linkup: ROUTING: IPv6 default gateway set to wan
<11>1 2022-04-15T21:01:20+02:00 opnsense-host opnsense 16955 - [meta sequenceId="16"] /usr/local/etc/rc.linkup: ROUTING: skipping IPv6 default route
<13>1 2022-04-15T21:01:20+02:00 opnsense-host opnsense 16955 - [meta sequenceId="17"] plugins_configure ipsec (,wan)
<13>1 2022-04-15T21:01:20+02:00 opnsense-host opnsense 16955 - [meta sequenceId="18"] plugins_configure ipsec (execute task : ipsec_configure_do(,wan))
<13>1 2022-04-15T21:01:20+02:00 opnsense-host opnsense 16955 - [meta sequenceId="19"] plugins_configure dhcp ()
<13>1 2022-04-15T21:01:20+02:00 opnsense-host opnsense 16955 - [meta sequenceId="20"] plugins_configure dhcp (execute task : dhcpd_dhcp_configure())
<13>1 2022-04-15T21:01:21+02:00 opnsense-host opnsense 16955 - [meta sequenceId="21"] plugins_configure dns ()
<13>1 2022-04-15T21:01:21+02:00 opnsense-host opnsense 16955 - [meta sequenceId="22"] plugins_configure dns (execute task : dnsmasq_configure_do())
<13>1 2022-04-15T21:01:21+02:00 opnsense-host opnsense 16955 - [meta sequenceId="23"] plugins_configure dns (execute task : unbound_configure_do())
<11>1 2022-04-15T21:01:21+02:00 opnsense-host opnsense 16955 - [meta sequenceId="24"] /usr/local/etc/rc.linkup: warning: ignoring missing default tunable request: debug.pfftpproxy
<13>1 2022-04-15T21:01:24+02:00 opnsense-host dhcp6c 88779 - [meta sequenceId="25"] RTSOLD script - Sending SIGHUP to dhcp6c
#15
hm ..it seems it's related to :

https://forum.opnsense.org/index.php?topic=27299.0

@Franco mentioned (thx for that): "Every one of those creates a host route if you select a gateway for it. If these host routes conflict with the use in the gateway monitoring (most of the time because at least one host route overlaps multiple interfaces or the whole config is reversed there) you get the gateway flapping when the wrong interface comes back as the monitor uses the wrong gateway to monitor another."

So .. i did follow this recommendation - (setting the DNS Server Interfaces all to "none" ) - at least opnsense dns is (still) running without issues (did not do the upgrade yet again)