AP IP access from WAN

[dcol]

I have two subnets LAN (192.168.1.1/24) and Wifi (192.168.2.1/24)
The Access Point IP is 192.168.2.254 and the GUI port is 1080
I can get to the AP from the 192.168.2.x subnet but not from the WAN.

I setup a NAT rule (attached) to access the AP from the internet. I can access the OPNsense GUI but not the AP.

The other thing I would like to do is get to the AP from the LAN.
The second attachment is the firewall log.

[dcol]

Fixed the WAN access. Worked after I turned on Layer 3 Accessibility in the AP. So it was the AP and not OPNsense blocking the access.

Fixed the LAN access by adding LAN to WAN in the NAT rule.