OPNsense Forum
English Forums => General Discussion => Topic started by: dcol on October 14, 2020, 06:42:00 pm
-
I have two subnets LAN (192.168.1.1/24) and Wifi (192.168.2.1/24)
The Access Point IP is 192.168.2.254 and the GUI port is 1080
I can get to the AP from the 192.168.2.x subnet but not from the WAN.
I setup a NAT rule (attached) to access the AP from the internet. I can access the OPNsense GUI but not the AP.
The other thing I would like to do is get to the AP from the LAN.
The second attachment is the firewall log.
-
Fixed the WAN access. Worked after I turned on Layer 3 Accessibility in the AP. So it was the AP and not OPNsense blocking the access.
Fixed the LAN access by adding LAN to WAN in the NAT rule.