No temperature data on Thermal Sensor widget after upgrade to 20.7.1

[nigelw]

Yes, so the grep is seeing the 'temperature' in the junk the sysctl appears to ouput. Can you do this, only if you are having problems with CPU temp:

# /sbin/sysctl -a  > /tmp/sysctrl_output.txt and then post the resultant text file here. It'll be interesting to see what's going on. Also give make model of hardware and amount of ram etc.

sysctrl output attached. Have also attached response from /widgets/api/get.php?load=temperature (not sure if that's helpful at all).

System is: PC Engines APU2 AMD GX-412TC SOC 4GB

[fruit]

Assume that was for me?

I have graphs but no temps in web GUI. All 2.1 versions I had GUI and graphs

Edit: HP T610,  4096 MB, 16GB SATA Flash Drive

[marjohn56]

@Fruit - Your text file is full of all sorts of junk, half of the system log file is in there too! Something nasty going on there, surprised the system works at all.

[marjohn56]

@nigelw - Yours looks correct, but you are not seeing any temperatures in the widget?

[nigelw]

@nigelw - Yours looks correct, but you are not seeing any temperatures in the widget?

Widget just shows the header.  :(

[marjohn56]

Going to fire up my old APU2, not had a firmware update for years... let's see what happens.

[nigelw]

Oh. Don't know why I didn't think of it earlier, but decided to turn the console (browser) on. There's this:

Code Select Expand

Error: Syntax error, unrecognized expression: #thermal_sensors_widget_<118>2020-08-18T22
    at Function.se.error (jquery-3.5.1.min.js:2)
    at se.tokenize (jquery-3.5.1.min.js:2)
    at se.select (jquery-3.5.1.min.js:2)
    at Function.se [as find] (jquery-3.5.1.min.js:2)
    at S.fn.init.find (jquery-3.5.1.min.js:2)
    at <anonymous>:19:23
    at Array.map (<anonymous>)
    at thermal_sensors_widget_update (<anonymous>:6:14)
    at index.php:1351
    at Array.map (<anonymous>)
    at Object.<anonymous> (index.php:1348)
    at c (jquery-3.5.1.min.js:2)
    at Object.fireWith [as resolveWith] (jquery-3.5.1.min.js:2)
    at l (jquery-3.5.1.min.js:2)
    at XMLHttpRequest.<anonymous> (jquery-3.5.1.min.js:2)

[marjohn56]

OK, what browser is that?

[fruit]

@Fruit - Your text file is full of all sorts of junk, half of the system log file is in there too! Something nasty going on there, surprised the system works at all.

Oh dear, I'll try a reboot. I'm in the middle of moving house so it might have to struggle on for a bit. Seems to be functioning OK

[marjohn56]

Have you done the syslog-ng patcch? Do you see syslog failing?

[franco]

There's also syslog garbage in the HTML output...

Error: Syntax error, unrecognized expression: #thermal_sensors_widget_<118>2020-08-18T22

[marjohn56]

There's also syslog garbage in the HTML output...

Error: Syntax error, unrecognized expression: #thermal_sensors_widget_<118>2020-08-18T22

yes, fun isn't it.  :)


memory or hd would be my first port of call.

[marjohn56]

@nigelw - still going through the upgrade process!


It's a bit slooooow!

[franco]

Maybe syslog-ng isn't running at all so the messages try to find a way "home". ;)

[marjohn56]

@nigelw - Updated from 19.7 something all the way to 20.7.1,  here's my lobby image.