Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - PencilHCV

#1
Mike,
Is the Internet problem you are having only on the devices that use Wifi or also those with network cable?
If it is only a Wifi problem. Try updating the Unifi controller and Firmware on all access points you have.

best regards,
Hugo
#2
Crowdsec is working properly now after updating to 25.1.1
Big thanks to all Developers

//HCV
#3
For information:
Tried uninstalling Crowsec Plugin, restarting OPNSense Server. Reinstalled Crowdsec Plugin. Still the same error.
So you don't have to do the same thing.
Have a nice day!

best regards,
Hugo
#4
Hi everyone.
Thanks for your work with all the updates.
After updating to ver. 25.1 Crowdsec shows no logs. I have the same error on all OPNSens that I take care of.
Is this something you already know?
Have a nice weekend!

Best regards!
Hugo
#5
Thanks to all!!

how can i mark this as solved?

best regards,
HCV
#6
doktornotor, so you mean this is what i most to do? se picture

#8
Maybe need to explain that my subnet is 192.168.0.1/24. Could it be that what is causing problems with DNS right now in the network is that under Services> Unbound DNS> Advanced> Rebind protection networks there is the IP address 192.168.0.0/ 16? Do I have to remove that IP address from that list?

//HCV
#9
Thanks Patrick and doktornotor!

doktornotor, you recommend to Use query forwarding. Sorry for my ignorance (I'm new to OPNSense) how/where did I do that?

best regards,
HCV
#10
Hi
Using OPNSense 24.1.10_8

1.-What is the best way to configure OPNSense when using it as a Router/Firewall and DHCP/DNS managed by a Windows 2019 Server? How to configure OPNSense DNS settings?

2.-In the same network has a Mail Server. And the users with laptops and mobiles should be able to access the Mail Server at work, with the External DNS Name (the same DNS name they use when they are outside the company). So I first configured in OPNServer>Service>Outbound DNS>Overrides>Host Overrides and added there the Host and domain name that you use externally to access the Mail Server in the Office which pointed to the Mail Server IP address). But it didn't work, so finally I added those DNS in Windows DNS Server and it worked.
Is this the right way?

Thank you if I can get some clarity on it all.

Best regards,
HCV
#11
Hi!
I also have Multi-Wan Failover and OPNSense 24.7.1 and tested this morning by unplugging the WAN1 network cable and after a few seconds my backup Internet was up and running without a problem. There were no problems either when I reconnected the cable for WAN1.
My OPNSense Server is bare metal server, not Virtual. To provide some more information about my environment
I configured Wan Failover I followed this video:

https://www.youtube.com/watch?v=CcXYiFj9mBA

Best regards,
HCV
#12
Hi iorx!
Buy a normal router, configure it according to your network (LAN, WAN). Connect it to your network.
Reinstall OPNSense but an older ver. on your current OPNSense Server. Configure it according to your network. Test.

best regards
(Med vänliga hälsningar)
Hugo Cortes V.
#13
Hi Greg!
Do you have DHCP Reservations?

If you have DHCP Reservations, check if any device hostname has strange characters, spaces, etc. do it in just one word and short
Start the Service.

best regards
Hugo
#14
Pls , can someone help me?
#15
hi,
We have a new ISP and got a new Public IP Address (WAN IP). Using OPENVPN.
My question is how do I change the WAN IP shown under VPN>OpenVPN>Client Export>Hostname. Because there the old WAN IP is displayed and I want to change to the new one we got from the new ISP.