Messages

1

19.7 Legacy Series / Re: PIA openVPN stopped working

« on: January 18, 2020, 12:27:57 am »

Thanks, what server and port are you using? Mine began working again today. I'm not sure how it's possible when I changed nothing. Hope it stays that way.

2

19.7 Legacy Series / Re: PIA openVPN stopped working

« on: January 17, 2020, 05:49:56 am »

Receiving the error [There were error(s) loading the rules: no IP address found for ovpnc1].

My PIA gateway gets and openvpn receives an IP. NAT rules haven't changed since it was working last.

Can I roll back my system a few updates to see if the issues goes away?

3

19.7 Legacy Series / PIA openVPN stopped working

« on: January 17, 2020, 04:25:39 am »

Does anyone have PIA vpn working on the latest build? About a week ago or so mine stopped working. It connects fine but I am not getting any internet.

4

19.7 Legacy Series / Re: Constant PHP errors with DYNDNS

« on: November 25, 2019, 07:49:07 pm »

Same issue for me using cloudflare

Code: [Select]

[25-Nov-2019 13:43:09 America/New_York] PHP Warning:  Invalid argument supplied for foreach() in /usr/local/etc/inc/plugins.inc.d/dyndns/phpDynDNS.inc on line 739

5

19.7 Legacy Series / OPNsense will only boot once with config

« on: November 25, 2019, 12:22:35 am »

Everything was working fine for years and then OPNsense went down. When it went down it locked up my connected windows computer. I tried to start OPNsense back up to no avail.I thought for sure there was a hardware issue so I ran memtest and smart extended. Everything checked out good so I ran a live installer and imported a recent backup. Everything booted up fine and I'm back running. Reboot the router and the same issue happens where it won't boot up. Did the same thing another time to confirm. Then I just installed to factory defaults and everything works and I can restart fine.

What could cause it to boot the restored config fine but not reboot it again? What logs should I be looking at and is there an easy way to isolate the errors? Why would the Windows pc lockup during the crash?

6

19.7 Legacy Series / Re: Port Forwarding Problem

« on: November 22, 2019, 07:34:52 am »

My isp blocks 25 and 80 by default but that seem to be your case. If the port forward worked and you were able to connect a few days ago try to think back to what changed. Start from fresh and follow a guide for port forwarding.

7

19.7 Legacy Series / Re: Port Forwarding Problem

« on: November 20, 2019, 12:35:14 am »

In settings NAT> port forward. You should have a rule

Interface=wan
Address=wan address
Ip=host
Ports=your ftp ports

It looks like you have LAN instead WAN

EDIT:just realized what you were trying to do.Try a port scan website to see if it is open. Does your isp block ports? DO you have something else before the router that could be blocking it. A port forward is pretty straight forward.

8

19.7 Legacy Series / Re: VPN Server

« on: November 19, 2019, 08:42:49 pm »

Do you have the correct [IP] address?

9

19.7 Legacy Series / Re: Port Forwarding Problem

« on: November 19, 2019, 08:36:30 pm »

If your ftp server is on the lan why do you need to port forward it to the lan?

10

19.7 Legacy Series / Re: Whole house VPN?

« on: November 19, 2019, 08:20:22 pm »

You can set up an alias for what routes through the vpn. Put the IPs in the alias that you want routed through the vpn. All you have to do is add and remove IPs if you want them routed or not.

11

19.7 Legacy Series / OpenVPN tap on android

« on: November 19, 2019, 08:10:11 pm »

I'm at a loss trying to get my vpn connection to work using openvpnclient on android with tap selected
in the settings. It connects fine with no errors that i'm aware of but I seem to have no dns since I can't reach any local devices or www pages. I'm running unbound as a resolver.  don't know what i'm missing but maybe someone will see something wrong.

OPNsense vpn server settings:
user auth local database
protocol=udp
device mode= tap
interface=wan
IPv4 Tunnel Network = 10.68.69.0/24 (my lan)
redirect gateway=checked
dynamic ip=checked
address pool= checked
firewall allow rule on wan and openvpn

12

Zenarmor (Sensei) / Re: Sensei on OPNsense - Application based filtering

« on: November 06, 2019, 02:35:58 am »

Just wanted to say it's a very nice interface and works well. Very user friendly. Ran into an issues where the reports are getting corrupted and I have to fix them. How far away on the roadmap is importing custom whitelist/blacklist and will it be on the free tier? Maybe even a page to add url's to pull our favorite lists and a few popular ones preloaded to enable?

You can currently create user defined black/white lists and custom categories with user-defined web categories.

I guess what you're looking for is bulk addition, am I correct? I guess we can provide a functionality to bulk import URLs/Domains in the free edition. This could be an enhanced version of the current functionality where you can not only input a single domain but a batch of domains to any user defined category.

Would that work?

That would be great to be able to bulk import lists. Would it be possible to have imports from URL?

When I use the live session report viewer I noticed there is only a blacklist action and not a whitelist action. Is this by design?

13

Zenarmor (Sensei) / Re: Sensei on OPNsense - Application based filtering

« on: November 05, 2019, 04:53:54 am »

Just wanted to say it's a very nice interface and works well. Very user friendly. Ran into an issues where the reports are getting corrupted and I have to fix them. How far away on the roadmap is importing custom whitelist/blacklist and will it be on the free tier? Maybe even a page to add url's to pull our favorite lists and a few popular ones preloaded to enable? With the new update taking away more control I'm going to have to whitelist some porn sites

14

19.1 Legacy Series / Re: DDNS error since 19.1.4

« on: March 17, 2019, 03:23:01 pm »

Wondering the same thing. I've been having issues with Cloudflare ddns and let's encrypt plugin. I'm not sure if it's something I'm doing but never had an issue before.

15

General Discussion / Re: Route one IP over VPN?

« on: October 12, 2018, 04:02:13 am »

The killswitch is no longer working for me in 18.7.  Does anyone have it working or a fix?