Messages

Thank you, the solution worked for me.

Hello,
my setup includes two WANs configured for load balancing.
Since updating to 26.1, one of the two works correctly from a routing point of view, but cannot be reached from the outside either via HTTPS or ping.
The firewall rules are correct and identical to those of the other WAN, which works just as well and can be reached from the outside via both HTTPS and ping.
The chipset for both NICs is Intel i225V, and before the update, both were reachable.
If I restart the firewall, the problematic NIC is reachable for a couple of minutes, and then stops responding to ping and HTTPS from the outside, while continuing to work for the connection. Its gateway always remains green.
What could have happened, and how can I fix it?

Many thanks!

Is Firewall: Settings: Advanced: Disable force gateway on (checkmarked)?

What's the right setting? Checkmarked or not?

TX

Hi,

is there a way to merge 2 sets of RRD data (either file *.rrd or xml from backup)?

I've changed the hw of my firewall, and inadvertently I've backed up the old-hw without the RRD data; what I wanna do is to restore the old RRD data without losing the new ones, stored from the day of the change between the old and the new hw.

Thanks,


S.

After digging deeper I now found a

Code Select Expand

rx_no_dma_resources issue on the NIC.
It looks as if this could be the root cause of the intermittent issues I am experiencing.

Where did you found this error?