Messages

Bonjour,
Mode bridge: sur ton routeur / modem OVH ou sur OpenSense ?

Hi,
When you have 2 or more Wan, multi-wan is usefull for load balancing and when you have an access down

I have found the problem: It's MTU problem. Since latests release, i was used default MTU on linux and android client (1500).
I have modified the MTU to 1300 and now, connexion is OK and no traffic issue...

Thank for your response but the configuration is correct, i use haproxy on a VM (like others servers), incomming traffic is ok, only VPN traffic seem very slow.
The traffic from OpenVPN is full open to Lan.
I have this problem with connexion with "high" traffic...
SSH is OK, ping also, idem for Telnet, but Web and VNC arent very slow (to a timeout).

Hello,

I have upgraded my Opnsense to 23.1.8 and i have issue for connecting my openVPN linux roadwarrior computers et android phone.
I have this issue while 2 or 3 weeks.

I can connect linux client without problems (with NetworkManager or CLI)
When connexion is ok, i can ping servers in Lan, can connect SSH but have timeout for web connexion.
I can test connecion with telnet:

Code Select Expand

telnet 192.168.x.x 443
with no issue, TCP connexion is ok, firewall rules are ok and worked since several years, but, no traffic and timout.

I read forum, searched around compression, but no success.

It is a big change with OpenVPN integration ?

Thank for your help

Bonjour,
Plus de détail sur le fonctionnement de Citrix Receiver ?

Oui mais je sais pas s'il est prévu de mettre OpenWRT sur leurs appliances ...
Oui, il vaut mieux voir la section anglaise ... bon courage

Heuuu .. quel rapport entre OpenWRT et Opnsense ?? ou j'ai loupé quelque chose peut être

Bonjour, tu as quo comme erreur ??
Puis, normalement, tu ne peux pas pinguer OPNSense de base ...
Donc, tu ping plutôt ta box et l'adresse d'OPNSense n'est pas celle là ...

Proxmox  ;D ;D

Hi,
I have same problem several days ago.
Not every day, but last two days.
The only solution was reboot OpnSense.
I have no problem the day, only the morning (process the night ?).
This problem was since 21.7.6-amd64 but now more frequent.

I have no idea where searching ...

Il te faut faire une règle sur le VPN pour accéder à tes Vlan

Bonjour,
Si sur ta box tu n'es pas en modem bridge, il est préférable que tu y définisse une adresse DMZ qui corresponde à l'IP Wan de ton OPNsense. Ça évitera déjà des effets de bord sur ta box.
Ça dirigera tous les flux sur ton firewall qui fera son job pour la sécurité ...

Maybe with Sensei or a real external web proxy

Hello,
You need to use Haproxy.
It is a plugin for that