Messages

Hello,
I use an openvpn client on my computer. The IPs I access are from Network 10.0.0.0/8. I have a dns A record for these IPs, but when I'm behind the OpnSense firewall I can't access them.

After some time searching for the problem, I realized that this was unbound and a setup in /usr/local/etc/inc/plugins.inc.d/unbound.inc in the DNS Rebinding Setup section

I commented on the line "private-address: 10.0.0.0/8", then overwritten the unbound settings and everything worked.

Is this foreseeable in the future to be configurable via the web interface?

Hello,
after upgrading to the latest version (OPNsense 19.1.9-amd64) pptp does not work. Prior to the upgrade, it worked.

I use 2 clients, under android and linux. The log file on the server is nothing like an error.

Someone had a similar problem. I can not understand why it does not work.

Hello,
i have 2 internet providers. I have made a balance between the two internet providers.
I used this documentation: https://wiki.opnsense.org/manual/how-tos/multiwan.html
But I have a problem with unbound.
If I make point 4, unbound does not work. All who are behind opnsense have no resolv.
If i remove it unbound works, but i have no balancing of traffic.

Did anyone have a similar problem or idea what is happening.

Hello,

I learned the hard way that it will be a permanent solution.

I executed the following command: opnsense-update -fp, rebooted, and then repaired the database. After 12 hours waiting to fix src_addr_details_086400.sqlite and many overwritten gigabytes. I realized that working in RAM disk is the best solution in my case
After rebooting the system and working in the disk. Database repair took about 1 to 2 hours.

After 2 days of work. I noticed that she was using a swap partition. After 2 days of work. I noticed that she was using a swap partition. I have 8GB RAM. I have free RAM.

Is this normal ?

Best regards

I tried to reset it, did not help.
I tried to fix it, did not help.
I deleted it and after I restart the server IO starts high.
A temporary solution is to use a disk in the RAM memory.

Hello,
I have not seen that you wrote.
I think I have been using the os-cache but I have removed it.

Hello,

I have been watching the last few days after I upgraded to 19.1 that sqlite3 is doing a high IO.
/usr/local/bin/sqlite3 /var/netflow/src_addr_details_086400.sqlite.fix

Somebody have an idea what's going on.
This makes redundancy over SSD about 1GB in 10 sec.

  9 Power_On_Hours 0x0032 100 100,000 Old_age Always - 5532
230 Media_Wearout_Indicator 0x0032 100 100,000 Old_age Always - 0x2f2b0e002f2b
232 Available_Reservd_Space 0x0033 100 100 005 Pre-fail Always - 100
233 NAND_GB_Written_TLC 0x0032 100 100 --- Old_age Always - 8328
234 NAND_GB_Written_SLC 0x0032 100 100,000 Old_age Always - 92355
241 Total_Host_GB_Written 0x0030 100 100,000 Old_age Offline - 33387
242 Total_Host_GB_Read 0x0030 100 100,000 Old_age Offline - 12507


If he continues to write. Soon I will have to change it.
I have enabled the /var and /tmp options in the ram disk at the moment.

Hello,
Тhanks for the reply, after restarting the server, things were fine.

Hello,
After i'm update opnsense and after i'm select menu System: Firmware. I see the following error:

An API exception occured
Error at /usr/local/opnsense/mvc/app/controllers/OPNsense/Core/Api/FirmwareController.php:661 - file_get_contents(/usr/local/opnsense/version/opnsense.name): failed to open stream: No such file or directory (errno=2)

# opnsense-version -v
18.7.5_1

Does anyone have any idea how can i fix this.