Messages

1

19.7 Legacy Series / Unbound resolver and private address

« on: October 06, 2019, 03:49:00 pm »

Hello,
I use an openvpn client on my computer. The IPs I access are from Network 10.0.0.0/8. I have a dns A record for these IPs, but when I'm behind the OpnSense firewall I can't access them.

After some time searching for the problem, I realized that this was unbound and a setup in /usr/local/etc/inc/plugins.inc.d/unbound.inc in the DNS Rebinding Setup section

I commented on the line "private-address: 10.0.0.0/8", then overwritten the unbound settings and everything worked.

Is this foreseeable in the future to be configurable via the web interface?

2

19.1 Legacy Series / After updating, I can not connect to the pptp server.

« on: June 13, 2019, 09:37:01 am »

Hello,
after upgrading to the latest version (OPNsense 19.1.9-amd64) pptp does not work. Prior to the upgrade, it worked.

I use 2 clients, under android and linux. The log file on the server is nothing like an error.

Someone had a similar problem. I can not understand why it does not work.

3

19.1 Legacy Series / Problems with multiwan and unbound

« on: May 06, 2019, 08:36:34 pm »

Hello,
i have 2 internet providers. I have made a balance between the two internet providers.
I used this documentation: https://wiki.opnsense.org/manual/how-tos/multiwan.html
But I have a problem with unbound.
If I make point 4, unbound does not work. All who are behind opnsense have no resolv.
If i remove it unbound works, but i have no balancing of traffic.

Did anyone have a similar problem or idea what is happening.

4

19.1 Legacy Series / Re: High IO on sqlite3

« on: February 21, 2019, 08:26:21 pm »

Hello,

I learned the hard way that it will be a permanent solution.

I executed the following command: opnsense-update -fp, rebooted, and then repaired the database. After 12 hours waiting to fix src_addr_details_086400.sqlite and many overwritten gigabytes. I realized that working in RAM disk is the best solution in my case
After rebooting the system and working in the disk. Database repair took about 1 to 2 hours.

After 2 days of work. I noticed that she was using a swap partition. After 2 days of work. I noticed that she was using a swap partition. I have 8GB RAM. I have free RAM.

Is this normal ?

Best regards

5

19.1 Legacy Series / Re: High IO on sqlite3

« on: February 17, 2019, 01:49:27 pm »

I tried to reset it, did not help.
I tried to fix it, did not help.
I deleted it and after I restart the server IO starts high.
A temporary solution is to use a disk in the RAM memory.

6

18.7 Legacy Series / Re: [SOLVED] error after update

« on: February 17, 2019, 10:41:28 am »

Hello,
I have not seen that you wrote.
I think I have been using the os-cache but I have removed it.

7

19.1 Legacy Series / High IO on sqlite3

« on: February 17, 2019, 10:32:07 am »

Hello,

I have been watching the last few days after I upgraded to 19.1 that sqlite3 is doing a high IO.
/usr/local/bin/sqlite3 /var/netflow/src_addr_details_086400.sqlite.fix

Somebody have an idea what's going on.
This makes redundancy over SSD about 1GB in 10 sec.

  9 Power_On_Hours 0x0032 100 100,000 Old_age Always - 5532
230 Media_Wearout_Indicator 0x0032 100 100,000 Old_age Always - 0x2f2b0e002f2b
232 Available_Reservd_Space 0x0033 100 100 005 Pre-fail Always - 100
233 NAND_GB_Written_TLC 0x0032 100 100 --- Old_age Always - 8328
234 NAND_GB_Written_SLC 0x0032 100 100,000 Old_age Always - 92355
241 Total_Host_GB_Written 0x0030 100 100,000 Old_age Offline - 33387
242 Total_Host_GB_Read 0x0030 100 100,000 Old_age Offline - 12507


If he continues to write. Soon I will have to change it.
I have enabled the /var and /tmp options in the ram disk at the moment.

8

18.7 Legacy Series / Re: error after update

« on: October 23, 2018, 09:11:48 am »

Hello,
Тhanks for the reply, after restarting the server, things were fine.

9

18.7 Legacy Series / [SOLVED] error after update

« on: October 21, 2018, 08:09:16 pm »

Hello,
After i'm update opnsense and after i'm select menu System: Firmware. I see the following error:

An API exception occured
Error at /usr/local/opnsense/mvc/app/controllers/OPNsense/Core/Api/FirmwareController.php:661 - file_get_contents(/usr/local/opnsense/version/opnsense.name): failed to open stream: No such file or directory (errno=2)

# opnsense-version -v
18.7.5_1

Does anyone have any idea how can i fix this.