Messages

He he he,

The CCS was doing something odd. I disabled the CCS and now I get the IP of 10.99.1.2 on the client.

Hello to you all,

I'm testing out OpenVPN on the latest version of Opnsense.
Everything works but I'm noticing a strange behavior:

The first client connected get the IP-address of 10.99.1.0.
The server is setup as instance instead of under Servers (legacy). I have not noticed this behavior before.
I have no settings for static IP-addresses or anything like that.

I haven't tested with more clients yet but this feels wrong?

Anyone with any idea of why this is happening?

Hello to you all :).

I have a dedicated server at Hetzner and there seems to be an issue for me to solve here :).

I have multiple public IP-address assigned from Hetzner to this server.
On the server I'm running proxmox.
I have a VPS running Opnsense on it and I want all the IP-addresses assigned to this OPNsense VPS.

The issue here is that Hetzner needs a specific MAC address to each IP-address so apparently I can't use Virtual IP because I need to assign the MAC address (given to me from Hetzner) to the interface and I can't do that with Virtual IP.

Either I need Proxmox to split this somehow, I still don't know how or I need OPNsense to create virtual interfaces, all assigned to the same virtual NIC but I don't know how to do this either.

Is there anyone in the forum who would know about a solution?

Best regards

Johan

Hmmmm I think it's because it also have some storage function.
It's a 4G modem, MF831 from ZTE.

It takes some time for the storage function to be done with so opnsense can't find the interface in time (I think).

The ifconfig -l doesn't give much:

vr0 vr1 vr2 pflog0 pfsync0 enc0 lo0 ue0

ifconfig -L on the other hand gives some more:

vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8280b<RXCSUM,TXCSUM,VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTATE>
        ether 00:0d:b9:38:ea:28
        inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
        inet6 fe80::1:1%vr0 prefixlen 64 scopeid 0x1
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        media: Ethernet autoselect (none)
        status: no carrier
vr1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8280b<RXCSUM,TXCSUM,VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTATE>
        ether 00:0d:b9:38:ea:29
        inet6 fe80::20d:b9ff:fe38:ea29%vr1 prefixlen 64 scopeid 0x2
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        media: Ethernet autoselect (none)
        status: no carrier
vr2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8280b<RXCSUM,TXCSUM,VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTATE>
        ether 00:0d:b9:38:ea:2a
        inet6 fe80::20d:b9ff:fe38:ea2a%vr2 prefixlen 64 scopeid 0x3
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        media: Ethernet autoselect (none)
        status: no carrier
pflog0: flags=100<PROMISC> metric 0 mtu 33184
pfsync0: flags=0<> metric 0 mtu 1500
        syncpeer: 0.0.0.0 maxupd: 128 defer: off
enc0: flags=0<> metric 0 mtu 1536
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 36:4b:50:b7:ef:da
        inet6 fe80::344b:50ff:feb7:efda%ue0 prefixlen 64 scopeid 0x8
        inet 192.168.0.153 netmask 0xffffff00 broadcast 192.168.0.255
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

Would really appreciate if this could be fixed :D

/ Johan

I have no idea at all. :P. The USB modem works out of the box.

Exactly what I'm doing. I reassign the interface bit as soon as the unit restart it runs a new auto-configuration and sets WAN to the first free nic.

After installation it runs auto-configure for LAN and WAN. This is messing with my settings because WAN is now a 4G connection via USB.

How do you disable this after installation?

/ Johan