1
16.7 Legacy Series / Re: Nano installation on a Alix 2D3
« on: September 05, 2016, 09:59:46 am »
Hmmmm I think it's because it also have some storage function.
It's a 4G modem, MF831 from ZTE.
It takes some time for the storage function to be done with so opnsense can't find the interface in time (I think).
The ifconfig -l doesn't give much:
vr0 vr1 vr2 pflog0 pfsync0 enc0 lo0 ue0
ifconfig -L on the other hand gives some more:
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8280b<RXCSUM,TXCSUM,VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTATE>
ether 00:0d:b9:38:ea:28
inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::1:1%vr0 prefixlen 64 scopeid 0x1
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
vr1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8280b<RXCSUM,TXCSUM,VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTATE>
ether 00:0d:b9:38:ea:29
inet6 fe80::20d:b9ff:fe38:ea29%vr1 prefixlen 64 scopeid 0x2
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
vr2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8280b<RXCSUM,TXCSUM,VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTATE>
ether 00:0d:b9:38:ea:2a
inet6 fe80::20d:b9ff:fe38:ea2a%vr2 prefixlen 64 scopeid 0x3
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
pflog0: flags=100<PROMISC> metric 0 mtu 33184
pfsync0: flags=0<> metric 0 mtu 1500
syncpeer: 0.0.0.0 maxupd: 128 defer: off
enc0: flags=0<> metric 0 mtu 1536
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 36:4b:50:b7:ef:da
inet6 fe80::344b:50ff:feb7:efda%ue0 prefixlen 64 scopeid 0x8
inet 192.168.0.153 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
Would really appreciate if this could be fixed
/ Johan
It's a 4G modem, MF831 from ZTE.
It takes some time for the storage function to be done with so opnsense can't find the interface in time (I think).
The ifconfig -l doesn't give much:
vr0 vr1 vr2 pflog0 pfsync0 enc0 lo0 ue0
ifconfig -L on the other hand gives some more:
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8280b<RXCSUM,TXCSUM,VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTATE>
ether 00:0d:b9:38:ea:28
inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::1:1%vr0 prefixlen 64 scopeid 0x1
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
vr1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8280b<RXCSUM,TXCSUM,VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTATE>
ether 00:0d:b9:38:ea:29
inet6 fe80::20d:b9ff:fe38:ea29%vr1 prefixlen 64 scopeid 0x2
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
vr2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8280b<RXCSUM,TXCSUM,VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTATE>
ether 00:0d:b9:38:ea:2a
inet6 fe80::20d:b9ff:fe38:ea2a%vr2 prefixlen 64 scopeid 0x3
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
pflog0: flags=100<PROMISC> metric 0 mtu 33184
pfsync0: flags=0<> metric 0 mtu 1500
syncpeer: 0.0.0.0 maxupd: 128 defer: off
enc0: flags=0<> metric 0 mtu 1536
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 36:4b:50:b7:ef:da
inet6 fe80::344b:50ff:feb7:efda%ue0 prefixlen 64 scopeid 0x8
inet 192.168.0.153 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
Would really appreciate if this could be fixed
/ Johan