Messages

1

21.7 Legacy Series / Re: Unable to open specific website

« on: December 22, 2021, 10:49:46 am »

Thank you all for good input 

I have tried it all, and then contacted my internet provider that also did not find anything wrong so next step was to contact the site owner. It turns out that my IP (and the other IP tested from) was part of a large network block that his provider had set up.

So now it works again.

2

21.7 Legacy Series / Re: Unable to open specific website

« on: November 29, 2021, 02:49:07 pm »

One site has google dns and the other cloudflare dns, so no blocks.

Do you have OPNsense, and can you open the mentioned website?

3

21.7 Legacy Series / (solved) Unable to open specific website

« on: November 23, 2021, 12:19:28 pm »

Hello,

I am not sure it because of OPNsense but i have a specific website I can not open. I have 2 site both running OPNsense and both sites can not open this website.

I think it is related to the fiber connection, but to be sure other OPNsense users do not have the same issue will some of you try and se if you can open www.hesk.com through a OPNsense controlled internet.

Thanks in advance.

4

21.1 Legacy Series / Emulex OCe14104B-NX network adapter

« on: February 22, 2021, 05:41:27 pm »

Hello,

Is the Emulex OCe14104B-NX 10 Gigabit SFP+ adapter well supported in OPNsense?

Thanks.

5

21.1 Legacy Series / Re: Update to 21.1.1 wont start

« on: February 11, 2021, 11:16:50 am »

My plugin page are empty, like there is nothing there at all.

I deleted the /usr/local/etc/pkg/repos/SunnyValley.conf so the repository was removed, now the update worked and after it finished the upgrade to 21.1.1 the plugin page also works

Thanks for the help.

6

21.1 Legacy Series / Re: Update to 21.1.1 wont start

« on: February 10, 2021, 10:51:12 pm »

But I do not have Sensei installed, so that should not stop me from updating OPNsense

7

21.1 Legacy Series / Re: Update to 21.1.1 wont start

« on: February 10, 2021, 10:21:14 pm »

It says:

pkg -d update -f
DBG(1)[67278]> pkg initialized
Updating OPNsense repository catalogue...
DBG(1)[67278]> PkgRepo: verifying update for OPNsense
DBG(1)[67278]> Pkgrepo, begin update of '/var/db/pkg/repo-OPNsense.sqlite'
DBG(1)[67278]> Request to fetch pkg+https://mirror.dns-root.de/opnsense/FreeBSD:12:amd64/21.1/libressl/meta.conf
DBG(1)[67278]> opening libfetch fetcher
DBG(1)[67278]> Fetch > libfetch: connecting
DBG(1)[67278]> Fetch: fetching from: https://mirror.dns-root.de/opnsense/FreeBSD:12:amd64/21.1/libressl/meta.conf with opts "i"
DBG(1)[67278]> Fetch: fetcher chosen: https
Fetching meta.conf: 100%    163 B   0.2kB/s    00:01
DBG(1)[67278]> Request to fetch pkg+https://mirror.dns-root.de/opnsense/FreeBSD:12:amd64/21.1/libressl/packagesite.txz
DBG(1)[67278]> opening libfetch fetcher
DBG(1)[67278]> Fetch > libfetch: connecting
DBG(1)[67278]> Fetch: fetching from: https://mirror.dns-root.de/opnsense/FreeBSD:12:amd64/21.1/libressl/packagesite.txz with opts "i"
DBG(1)[67278]> Fetch: fetcher chosen: https
Fetching packagesite.txz: 100%  198 KiB 202.6kB/s    00:01
DBG(1)[67278]> PkgRepo: extracting packagesite.yaml of repo OPNsense
DBG(1)[78321]> PkgRepo: extracting signature of repo in a sandbox
DBG(1)[67278]> Pkgrepo, reading new packagesite.yaml for '/var/db/pkg/repo-OPNsense.sqlite'
Processing entries: 100%
OPNsense repository update completed. 725 packages processed.
Updating SunnyValley repository catalogue...
DBG(1)[67278]> PkgRepo: verifying update for SunnyValley
DBG(1)[67278]> PkgRepo: need forced update of SunnyValley
DBG(1)[67278]> Pkgrepo, begin update of '/var/db/pkg/repo-SunnyValley.sqlite'
DBG(1)[67278]> Request to fetch https://updates.sunnyvalley.io/opnsense/repo//meta.conf
DBG(1)[67278]> opening libfetch fetcher
DBG(1)[67278]> Fetch > libfetch: connecting
DBG(1)[67278]> Fetch: fetching from: https://updates.sunnyvalley.io/opnsense/repo//meta.conf with opts "i"
DBG(1)[67278]> Request to fetch https://updates.sunnyvalley.io/opnsense/repo//meta.txz
DBG(1)[67278]> opening libfetch fetcher
DBG(1)[67278]> Fetch > libfetch: connecting
DBG(1)[67278]> Fetch: fetching from: https://updates.sunnyvalley.io/opnsense/repo//meta.txz with opts "i"
pkg: https://updates.sunnyvalley.io/opnsense/repo//meta.txz: Not Found
repository SunnyValley has no meta file, using default settings
DBG(1)[67278]> Request to fetch https://updates.sunnyvalley.io/opnsense/repo//packagesite.txz
DBG(1)[67278]> opening libfetch fetcher
DBG(1)[67278]> Fetch > libfetch: connecting
DBG(1)[67278]> Fetch: fetching from: https://updates.sunnyvalley.io/opnsense/repo//packagesite.txz with opts "i"
pkg: https://updates.sunnyvalley.io/opnsense/repo//packagesite.txz: Not Found
Unable to update repository SunnyValley
Error updating repositories!

8

21.1 Legacy Series / (solved) Update to 21.1.1 wont start

« on: February 10, 2021, 01:32:02 pm »

Hello,

When I am trying to update from 21.1 to 21.1.1 OPNsense says:

Error updating repositories!
A firmware update is currently in progress.

I have tried rebooting, but still same message.

9

20.7 Legacy Series / OPNsense Business Edition versions

« on: January 04, 2021, 10:10:20 pm »

Hello,

Is there a place where I can see what the current version of the OPNsense Business Edition is? Like the blog that announces new versions of the open edition, a place that mentions that now is the OPNsense Business Edition on 20.7.5 or something like that?

Kind Regards

10

20.1 Legacy Series / Scale OpenVPN for many users

« on: March 16, 2020, 09:41:53 pm »

Is there a way (behind in config) to scale the OpenVPN service for many users, like get it to start more daemons?

11

19.7 Legacy Series / Re: [Help needed] OPNsense stops responding

« on: March 14, 2020, 10:36:12 pm »

We does not have a bridge interface..

But are still hit hard by the error, firewalls dies everyday if not rebooted.

12

19.7 Legacy Series / Re: [Help needed] OPNsense stops responding

« on: February 27, 2020, 05:37:41 pm »

Still a problem, firewall dies every other day. Everything seems to die, not even SSH to the firewall works.

This time there was an error on the console (see attached) it was filled with the message arprequest: cannot find matching address.

I need input to where to look for clues.

13

19.7 Legacy Series / Re: OPNsense stops responding

« on: January 27, 2020, 12:33:36 pm »

I have updated to 19.7.9 and unfortunately that did not solve the problem 

14

19.7 Legacy Series / Re: OPNsense stops responding

« on: January 08, 2020, 05:25:12 pm »

Still a problem, someone who has an idea?

15

19.7 Legacy Series / Re: OPNsense stops responding

« on: December 17, 2019, 02:59:53 pm »

Will there be a update? or what can I do..