1
19.7 Production Series / Re: OPNsense stops responding
« on: January 27, 2020, 12:33:36 pm »
I have updated to 19.7.9 and unfortunately that did not solve the problem 
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
19.7 Production Series / Re: OPNsense stops responding
« on: January 08, 2020, 05:25:12 pm »
Still a problem, someone who has an idea?
3
19.7 Production Series / Re: OPNsense stops responding
« on: December 17, 2019, 02:59:53 pm »
Will there be a update? or what can I do..
4
19.7 Production Series / [Help needed] OPNsense stops responding
« on: December 12, 2019, 01:00:21 pm »
I have a CARP setup with 2 OPNsense firewalls, and every 1-3 days the master firewall stops responding, no GUI, no PING and the backup becomes master.
Only the CLI on the console is responding, and with that I can reboot the main firewall, and then it works again for 1-3 days before it dies again.
There is no crash reports in the GUI, both firewalls are running 19.7.3 Business Edition.
Only the CLI on the console is responding, and with that I can reboot the main firewall, and then it works again for 1-3 days before it dies again.
There is no crash reports in the GUI, both firewalls are running 19.7.3 Business Edition.
5
18.1 Legacy Series / Re: [SOLVED] Cannot install opnsense 18.1
« on: May 17, 2018, 04:56:05 pm »
Thanks for the tip about Fitlet 2, I had to combine the 2 inputs from jelly-ck and gbitglenn
So I ended up with:
hint.hpet.0.clock=0
hint.ahci.0.msi=2
hint.ahcich.0.sata_rev=2
hint.sdhci_pci.0.disabled=1
hint.sdhci_pci.1.disabled=1
OPNsense is now up and running on Flitlet 2
So I ended up with:
hint.hpet.0.clock=0
hint.ahci.0.msi=2
hint.ahcich.0.sata_rev=2
hint.sdhci_pci.0.disabled=1
hint.sdhci_pci.1.disabled=1
OPNsense is now up and running on Flitlet 2
6
18.1 Legacy Series / Re: Improved security headers?
« on: May 17, 2018, 12:57:49 pm »
Great, thanks
7
18.1 Legacy Series / Improved security headers?
« on: May 15, 2018, 11:51:22 pm »
Is it possible to add the following security headers to web GUI?
X-Content-Type-Options
X-XSS-Protection
X-Frame-Options
Content-Security-Policy
or as wishlist for future updates
X-Content-Type-Options
X-XSS-Protection
X-Frame-Options
Content-Security-Policy
or as wishlist for future updates
8
18.1 Legacy Series / Re: Has anyone had a problem-free upgrade from OPNsense 17.7.12 to 18.1?
« on: February 01, 2018, 12:00:33 am »
Smooth upgrade from 17.7.12 to 18.1 from SSH.
Running on Fitlet A10.
Running on Fitlet A10.
9
17.1 Legacy Series / <SOLVED> Apinger dont start after update to 17.1.7
« on: June 14, 2017, 04:52:51 pm »
Sorry for the late reply, I got distracted by more pressing maters.
The problem still existed after update to 17.1.8, the logs says:
apinger: No usable targets found, exiting
The default gateway seems to be correctly configured. I edit the gateway (edit/save) without changing a thing the problem goes away.
The problem still existed after update to 17.1.8, the logs says:
apinger: No usable targets found, exiting
The default gateway seems to be correctly configured. I edit the gateway (edit/save) without changing a thing the problem goes away.
10
17.1 Legacy Series / <SOLVED> Apinger dont start after update to 17.1.7
« on: May 18, 2017, 06:37:07 pm »
After updating to 17.1.7 the Apinger service (Gateway Monitoring Daemon) dont start, and cannot be startet manually.
11
16.7 Legacy Series / Re: Primary firewall crashes in HA setup
« on: October 09, 2016, 05:58:38 pm »
truss from openvpn and filterlog
12
16.7 Legacy Series / Re: Primary firewall crashes in HA setup
« on: October 09, 2016, 05:58:04 pm »
Now it happened again, we have been "lucky" with the updates to OPNsense - they reset the process when the firewall reboots.
Logs attached.
Logs attached.
13
16.7 Legacy Series / Re: Primary firewall crashes in HA setup
« on: September 20, 2016, 05:45:09 pm »
7 days in average, it can happen after 4 days but also first after 10.
I will get a top and dmesg output next time it happens.
I will get a top and dmesg output next time it happens.
14
16.7 Legacy Series / Primary firewall crashes in HA setup
« on: September 15, 2016, 04:40:21 pm »
We have two opnsense boxes in HA setup, and every 6-7 day the primary firewall "crashes" (it does not generate a crash report).
When it happens we notices it by our VPN users cannot get access, the primary have stopped processing trafic and does not accept connections (GUI/SSH cannot be accessed).
On the secundary firewall, in "Firewall / Virtual IPs / Status" shows that it have taken control of all 3 CARP interfaces as master. So all normal trafic flows.
The CLI/Console on the primary firewall is working, so the problem can be fixed by selecting reboot in the menu, then the primary firewall comes up agian, and resumes the CARP interfaces as master, and the secundary becomes slave.
6-7 days later, it starts over agian..
When it happens we notices it by our VPN users cannot get access, the primary have stopped processing trafic and does not accept connections (GUI/SSH cannot be accessed).
On the secundary firewall, in "Firewall / Virtual IPs / Status" shows that it have taken control of all 3 CARP interfaces as master. So all normal trafic flows.
The CLI/Console on the primary firewall is working, so the problem can be fixed by selecting reboot in the menu, then the primary firewall comes up agian, and resumes the CARP interfaces as master, and the secundary becomes slave.
6-7 days later, it starts over agian..
15
17.1 Legacy Series / Re: [CALL FOR TESTING] Phalcon 3.0
« on: September 11, 2016, 11:44:00 pm »
Installed phalcon-3.0.1 on 16.7.3 amd64,
Have navigated the whole GUI and everything seems to work as supposed.
Have navigated the whole GUI and everything seems to work as supposed.