Author Topic: When changing to Manual outbound NAT rule generation, all rules are wiped! (Read 10619 times)

gh0st · « **on:** May 27, 2018, 01:44:45 pm »

Hi!

Using OVPN as our VPN provider, and are now setting it up at another location. The problem is that when changing to Manual outbound NAT rule generation (no automatic rules are being generated), all rules are wiped.

Also, the checkbox to clone them is gone from prev releases!

How do I solve this now?

gh0st · « **Reply #1 on:** May 27, 2018, 08:02:52 pm »

Checked the firewall at home, and there I can find the checkboxes! But not on a freshly installed system over at work.

franco · « **Reply #2 on:** May 28, 2018, 10:32:57 am »

There should always be a configuration history under System: Configuration: History to restore from...

If you know how to reproduce the problem please let me know.

Cheers,
Franco

Adam.P · « **Reply #3 on:** August 17, 2018, 02:43:38 pm »

I noticed this same problem today. Fresh install of 18.1, updated, then switched to manual outbound rule generation and *poof* all the rules are gone. In past versions it converted the automatic rules to manual rules that can be edited. Can we get this feature back?

Adam.P · « **Reply #4 on:** August 20, 2018, 02:24:32 pm »

Quote from: franco on May 28, 2018, 10:32:57 am

If you know how to reproduce the problem please let me know.

Franco, how to reproduce the problem is in my post above. Is that normal behavior?

Adam.P · « **Reply #5 on:** August 23, 2018, 02:16:31 pm »

Since I can't seem to get a response, maybe pfSense would be a better fit. The forum seems to be much more active and helpful over there.

marjohn56 · « **Reply #6 on:** August 23, 2018, 02:22:38 pm »

Franco is on holiday. He'll be at the beginning of September.

franco · « **Reply #7 on:** September 03, 2018, 04:27:14 pm »

I'll take a look in exchange for a ticket:

https://github.com/opnsense/core/issues

Cheers,
Franco

Adam.P · « **Reply #8 on:** September 06, 2018, 04:49:11 pm »

Quote from: franco on September 03, 2018, 04:27:14 pm

I'll take a look in exchange for a ticket:

https://github.com/opnsense/core/issues

Cheers,
Franco

Thank you, Franco. I have created an issue on Github.

improwise · « **Reply #9 on:** September 23, 2018, 04:03:23 pm »

Can confirm this problem(s), happened to me on a fresh installation also.

franco · « **Reply #10 on:** September 24, 2018, 08:57:42 am »

I've looked at it and I have to "NAK" the "all rules are wiped" part. If we talk about "all" = "all automatic" then that's a yes, but it was a bugfix because users reported an endless duplication of automatic rules. Your user-defined rules will not be tampered with.

Automatic rules are not for editing. That's why we have hybrid *and* manual mode so all combinations are possible.

Cheers,
Franco

Author Topic: When changing to Manual outbound NAT rule generation, all rules are wiped! (Read 10619 times)

gh0st

When changing to Manual outbound NAT rule generation, all rules are wiped!

gh0st

Re: When changing to Manual outbound NAT rule generation, all rules are wiped!

franco

Re: When changing to Manual outbound NAT rule generation, all rules are wiped!

Adam.P

Re: When changing to Manual outbound NAT rule generation, all rules are wiped!

Adam.P

Re: When changing to Manual outbound NAT rule generation, all rules are wiped!

Adam.P

Re: When changing to Manual outbound NAT rule generation, all rules are wiped!

marjohn56

Re: When changing to Manual outbound NAT rule generation, all rules are wiped!

franco

Re: When changing to Manual outbound NAT rule generation, all rules are wiped!

Adam.P

Re: When changing to Manual outbound NAT rule generation, all rules are wiped!

improwise

Re: When changing to Manual outbound NAT rule generation, all rules are wiped!

franco

Re: When changing to Manual outbound NAT rule generation, all rules are wiped!