Use Private Internet Access

[gytepr65]

Hello,

Some have installed VPN provider from Private Internet Access or another of course on Opnsense and how has you config that
Hope some can give an tips

[BeNe]

PIA has a good HowTo --> https://www.privateinternetaccess.com/pages/client-support/pfsense
Yeah it is for pfSense but you will find your way on OPNsense  ;)

[gytepr65]

Thanks I will take look on that, but when do that in firewall NAT outbound disapear Manual Outbound NAT rule generation (AON)" before take save I see two rules after have saved is they gone.
Think must do manual fill in them

[BeNe]

Yes! Best is to take a screenshot before and to build them after the change again.

[gytepr65]

But that is strange when click on Mode under General Logging Options to "Manual Outbound NAT rule generation (AON)",
Is there none but if I looking on an youtube:
https://www.youtube.com/watch?v=FWzIZmLRJRA and go to 5 min and 58 s they has I not when click to save that is strange.
Perhaps my WAN is connected to my routers LAN port for that computer have installed OPnsense on.

[someone1337]

I still had this problem running OPNSense 22, and solved using steps in the github issue:

https://github.com/opnsense/core/issues/4389

The solution posted there works, but I had to switch over to the OPNSense Development branch in order for it to work. 

No idea why this is such a problem (still)...

Edit: This was a reply to the wrong thread ... sorry!  I'll reply to the correct thread...