OPNsense Forum

English Forums => General Discussion => Topic started by: gytepr65 on March 16, 2018, 12:10:14 pm

Title: Use Private Internet Access
Post by: gytepr65 on March 16, 2018, 12:10:14 pm

Hello,

Some have installed VPN provider from Private Internet Access or another of course on Opnsense and how has you config that
Hope some can give an tips

Title: Re: Use Private Internet Access
Post by: BeNe on March 16, 2018, 08:39:16 pm

PIA has a good HowTo --> https://www.privateinternetaccess.com/pages/client-support/pfsense
Yeah it is for pfSense but you will find your way on OPNsense  ;)

Title: Re: Use Private Internet Access
Post by: gytepr65 on March 17, 2018, 09:59:37 am

Thanks I will take look on that, but when do that in firewall NAT outbound disapear Manual Outbound NAT rule generation (AON)" before take save I see two rules after have saved is they gone.
Think must do manual fill in them

Title: Re: Use Private Internet Access
Post by: BeNe on March 17, 2018, 03:08:28 pm

Yes! Best is to take a screenshot before and to build them after the change again.

Title: Re: Use Private Internet Access
Post by: gytepr65 on March 18, 2018, 01:17:04 pm

But that is strange when click on Mode under General Logging Options to "Manual Outbound NAT rule generation (AON)",
Is there none but if I looking on an youtube:
https://www.youtube.com/watch?v=FWzIZmLRJRA (https://www.youtube.com/watch?v=FWzIZmLRJRA) and go to 5 min and 58 s they has I not when click to save that is strange.
Perhaps my WAN is connected to my routers LAN port for that computer have installed OPnsense on.

Title: Re: Use Private Internet Access
Post by: someone1337 on May 01, 2022, 04:33:10 pm

I still had this problem running OPNSense 22, and solved using steps in the github issue:

https://github.com/opnsense/core/issues/4389 (https://github.com/opnsense/core/issues/4389)

The solution posted there works, but I had to switch over to the OPNSense Development branch in order for it to work. 

No idea why this is such a problem (still)...

Edit: This was a reply to the wrong thread ... sorry!  I'll reply to the correct thread...