Multiple VLAN/Multiple WAN

[Julien]

Hi guys,
in our productions we have OPNsense with 6 NICS, and a switch 48 ports.
We have 8 IP we can use on the WAN side, and 4 VLANS. ( all 4 VLANS are created on the physical LAN 1)
We want to specify each VLAN with a physique IP as It.
has anyone done this before and there are no complications ?

Thank you

[marijn]

Hi,

Yes, this is working fine for me, you can just create VIPs, and then it's working without any problem.

[Julien]

Hi,

Yes, this is working fine for me, you can just create VIPs, and then it's working without any problem.

Can you explain more about the VIPs ? I can't seems to find this on the documentation.
what do you mean exactly with the VIPs ? or do you mean VLANS ?

[va176thunderbolt]

VIP = Virtual IP's. Under the firewall menu, there is an option to configure them.It's very useful when you get a subnet from your ISP - you can define additional IP's on your WAN interface, then create rules/NAT to leverage them.

[cyberbot]

VIP = Virtual IP's. Under the firewall menu, there is an option to configure them.It's very useful when you get a subnet from your ISP - you can define additional IP's on your WAN interface, then create rules/NAT to leverage them.

here it does explains a bit about the VIP
https://doc.pfsense.org/index.php/What_are_Virtual_IP_Addresses

good luck