OPNsense Forum

Archive => 17.7 Legacy Series => Topic started by: Julien on September 29, 2017, 08:37:55 pm

Title: Multiple VLAN/Multiple WAN
Post by: Julien on September 29, 2017, 08:37:55 pm
Hi guys,
in our productions we have OPNsense with 6 NICS, and a switch 48 ports.
We have 8 IP we can use on the WAN side, and 4 VLANS. ( all 4 VLANS are created on the physical LAN 1)
We want to specify each VLAN with a physique IP as It.
has anyone done this before and there are no complications ?

Thank you
Title: Re: Multiple VLAN/Multiple WAN
Post by: marijn on September 29, 2017, 09:06:14 pm
Hi,

Yes, this is working fine for me, you can just create VIPs, and then it's working without any problem.
Title: Re: Multiple VLAN/Multiple WAN
Post by: Julien on September 30, 2017, 08:47:13 pm
Hi,

Yes, this is working fine for me, you can just create VIPs, and then it's working without any problem.
Can you explain more about the VIPs ? I can't seems to find this on the documentation.
what do you mean exactly with the VIPs ? or do you mean VLANS ?

Title: Re: Multiple VLAN/Multiple WAN
Post by: va176thunderbolt on October 02, 2017, 02:14:41 pm
VIP = Virtual IP's. Under the firewall menu, there is an option to configure them.It's very useful when you get a subnet from your ISP - you can define additional IP's on your WAN interface, then create rules/NAT to leverage them.
Title: Re: Multiple VLAN/Multiple WAN
Post by: cyberbot on October 03, 2017, 11:54:25 pm
VIP = Virtual IP's. Under the firewall menu, there is an option to configure them.It's very useful when you get a subnet from your ISP - you can define additional IP's on your WAN interface, then create rules/NAT to leverage them.
here it does explains a bit about the VIP
https://doc.pfsense.org/index.php/What_are_Virtual_IP_Addresses

good luck