NUT

[jmcgee]

version OPNsense 26.1.8_5-amd64
This was working, then upgrade stopped showing NUT diagnostics, at least. don't know if NUT was running.  Upgraded received NUT update.  Same things. From terminal:

usbconfig list | grep -i "power\|apc"
ugen0.2: <Uninterruptible Power Supply American Power Conversion> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (2mA)
root@OPNsense:~ # cat /usr/local/etc/nut/nut.conf
# Please don't modify this file as your changes might be overwritten with
# the next update.
#
MODE=standalone
root@OPNsense:~ # cat /usr/local/etc/nut/ups.conf
# Please don't modify this file as your changes might be overwritten with
# the next update.
#
[APC]
driver=usbhid-ups
root@OPNsense:~ # cat /usr/local/etc/nut/upsd.conf
# Please don't modify this file as your changes might be overwritten with
# the next update.
#
LISTEN 127.0.0.1 3493
LISTEN ::1 3493
root@OPNsense:~ # cat /usr/local/etc/nut/upsmon.conf
# Please don't modify this file as your changes might be overwritten with
# the next update.
#
MONITOR APC 1 monuser Password master
SHUTDOWNCMD "/usr/local/etc/rc.halt"
POWERDOWNFLAG /etc/killpower
root@OPNsense:~ # service nut status
nut is not running.
root@OPNsense:~ # service nut_upsmon status
nut_upsmon is running as pid 97492.
root@OPNsense:~ # service nut start 2>&1
root@OPNsense:~ #
root@OPNsense:~ # grep -i nut /var/log/messages | tail -20
grep: /var/log/messages: No such file or directory
                                                                               
Broadcast Message from root@OPNsense.1615                                     
        (no tty) at 11:12 CDT...                                               
                                                                               
UPS APC is unavailable 

[Monviech (Cedrik)]

Hello, please use the forum search. There have been quite some threads about this issue already. Thank you :)