Changed GUI ports, no acces anymore!

[gh0st]

Running 17.1.r1 and all is nearly 100% fine and working.

Needed to swap ports for the GUI, and replaced the HTTPS first and all worked like a charm.
After I changed to HTTP and 8080, now I can't no longer access the GUI.

The last solution is to wipe and reset it thru the terminal, but as I wrote, it's the last solution.

Any tips?

[mr.rosh]

change wan and lan ip address to something else, and see if it rebinds to default ports, then change back up the ip addresess of wan/lan ip, and it will rebind to default ports.

may be worth trying.

[bartjsmit]

Connect to the console (via SSH if configured) and select option 13. Restore a configuration dated before you made the change in GUI port.

If you want to change the GUI port, you need to create a firewall rule first.

Bart...

[franco]

Modern browsers try to enforce HTTPS, this may get in the way of HTTP on port 8080.