OPNsense Forum
Archive => 17.1 Legacy Series => Topic started by: gh0st on February 01, 2017, 02:17:52 pm
-
Running 17.1.r1 and all is nearly 100% fine and working.
Needed to swap ports for the GUI, and replaced the HTTPS first and all worked like a charm.
After I changed to HTTP and 8080, now I can't no longer access the GUI.
The last solution is to wipe and reset it thru the terminal, but as I wrote, it's the last solution.
Any tips?
-
change wan and lan ip address to something else, and see if it rebinds to default ports, then change back up the ip addresess of wan/lan ip, and it will rebind to default ports.
may be worth trying.
-
Connect to the console (via SSH if configured) and select option 13. Restore a configuration dated before you made the change in GUI port.
If you want to change the GUI port, you need to create a firewall rule first.
Bart...
-
Modern browsers try to enforce HTTPS, this may get in the way of HTTP on port 8080.