Cannot access web ui with different gateway

[iekozz]

Hi all,

We have DEC3860 that is running smoothly. However, I"m running into a few issues.

We have three internet lines: One 100 mb/s one 200 mb/s and one 1gb/s. For some networks I have enabled the gigabit network under Firewall -> Rules -> Network -> Gateway -> Gigabit one.

The speeds are good over wifi but when connected I cannot access the web interface even though I'm on the same network that works with the default gateway. I have attached a few screenshots of the firewall rules on the vlan.

The diagram now is

DEC3860 -> Switch Pro 24 -> USW Pro Max 24 and US-8-150W for the switches through the building. This goes to 40 ap's also from unifi with flex mini's in between with all vlans configured already.

LAN Network: 10.9.24.x
LAN Network using sfp: 10.8.24.x

All other networks can only access the dns server and the internet. Our personal network can access everything. 

So the few remaining questions are this:

1: How do I access the web ui using my allow all network using the gigabit wan.

2: Is is possible to quickly change all the vlans from the LAN interface to the SFPLAN? That is because it's 10GB connection to the switches and we can upgrade to 4Gb/s connection later this year. All the unfi stuff needs to be stay online ofcourse.