Home
Help
Search
Login
Register
OPNsense Forum
»
English Forums
»
Virtual private networks
»
IPSec / OpenVPN Setup stopped working after upgrade to 23.7.10
« previous
next »
Print
Pages: [
1
]
Author
Topic: IPSec / OpenVPN Setup stopped working after upgrade to 23.7.10 (Read 1009 times)
eduard.bicerimatei
Newbie
Posts: 2
Karma: 0
IPSec / OpenVPN Setup stopped working after upgrade to 23.7.10
«
on:
December 28, 2023, 05:58:12 pm »
Hello all, ran myself into a corner during some maintenance work and need your help!
We have a 3x OPNSense VM Setup (IE, US and SA) in 3 separate AWS VPCs. Each VM has 2 ENIs (one public and one private). Each VM runs an OpenVPN server (public) and 2 IPSec tunnel to the remaining 2.
Before the upgrade, i was able to login with openvpn into the IE VM, and then access US resources (traffic was going local -> VPN -> IPSec -> VPC).
This morning i did the upgrade to 23.7, and after the final restart 2 things broke:
- the IE VM can't reach US resources (other VMs behind the US VM) -> i had to manually add static routes on the IE VM with specific US subnets going via ipsec
- me, on vpn, i can't reach US resources (even if the IE VM can reach now, because of the static routes).
I went over all settings in IPSec, checked and double checked the tunnel settings, everything looks ok.
Then I went over the Firewall rules, also looks ok.
Not sure where I should start debugging this (kinda newbie on the networking side) so any help would be greatly appreciated.
Logged
eduard.bicerimatei
Newbie
Posts: 2
Karma: 0
Re: IPSec / OpenVPN Setup stopped working after upgrade to 23.7.10
«
Reply #1 on:
December 29, 2023, 12:06:36 pm »
Hello,
Some more context.
I was able to restore the "before upgrade" VM and noticed it has extra routes (netstat -4rn) that are not defined in the GUI.
So, I would suspect a config file somewhere that defines the routes and gets applied after restart, but it somehow got lost during the upgrade...
Any pointers in the right direction would be greatly appreciated.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
English Forums
»
Virtual private networks
»
IPSec / OpenVPN Setup stopped working after upgrade to 23.7.10