Slow Speed After Install

[jokerz4fun]

Hello

I installed opnsnese a few days ago and since then I cannot get over 268mbs on wifi(5ghz). I have 1200mbs coming in from Comcast and on my ASUS router I get around 928mbs. Right now I have my modem plugged into my computer that is running opensense only, then a switch plugged into that and my Ubiquity AP plugged into the switch. I have searched around and saw other have similar issues and tried their solutions but nothing seems to work. I did switch the speed and duplex in WAN and LAN to 1000baseT full duplex and that didnt seem to do much it was set to auto. I also made sure Hardware CRC TSO and LRO were all checked and disabled. I also tried turning IPv6 off to see if that did anything and it didnt. I also dont have a vpn or vlan set up not sure if that will make a difference. I have reset everything at least once and if I plug my old ASUS router back in my speeds go right back up to almost a gig. Any help you can throw my way would be greatly helpful. Im new at Linux and networking so Im sure there is something Im overlooking or have set up wrong. Or maybe its my hardware?

Version
OPNsense 23.1.7_3-amd64
FreeBSD 13.1-RELEASE-p7
OpenSSL 1.1.1t 7 Feb 2023

CPU
Intel(R) Xeon(R) CPU E5504 @ 2.00GHz (4 cores, 4 threads)

NIC
Cisco Intel PCIE-IRJ45 Quad Port