Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
16.1 Legacy Series
»
[SOLVED] Load Balancer - relayd service stopped
« previous
next »
Print
Pages: [
1
]
Author
Topic: [SOLVED] Load Balancer - relayd service stopped (Read 19309 times)
javier.wong
Newbie
Posts: 9
Karma: 1
[SOLVED] Load Balancer - relayd service stopped
«
on:
May 31, 2016, 04:00:43 am »
Looking at the Log File it says
May 31 09:56:36 relayd[68412]: hce exiting, pid 68412
May 31 09:56:36 relayd[67754]: no actions, nothing to do
May 31 09:56:36 relayd[67754]: /var/etc/relayd.conf:9: syntax error
I have attached my config.
Any ideas? Thanks.
«
Last Edit: October 01, 2016, 02:02:36 pm by franco
»
Logged
franco
Administrator
Hero Member
Posts: 17210
Karma: 1566
Re: Load Balancer - relayd service stopped
«
Reply #1 on:
June 01, 2016, 06:53:24 pm »
Hi Javier,
It's a little hard for me to reproduce as the load balancer setup is complex. Can you export the Load Balancer Section from your config using the backup feature? You can also send it via PM or Email if you want.
Cheers,
Franco
Logged
javier.wong
Newbie
Posts: 9
Karma: 1
Re: Load Balancer - relayd service stopped
«
Reply #2 on:
September 13, 2016, 12:34:18 pm »
Hi Franco,
So weird, I never ever got this reply in my mailbox!
I ignored this issue but I am trying the load balancer again. This time I'm getting a different error. Attached is my config.
This time i get the following error: relayd[28071]: fatal: cannot add rule: Operation not supported by device
The service starts for a short period of time before exiting out.
Any ideas? Thanks.
Javier
Logged
javier.wong
Newbie
Posts: 9
Karma: 1
Re: Load Balancer - relayd service stopped
«
Reply #3 on:
September 13, 2016, 01:04:13 pm »
Hi Franco,
FYI, on another config, If i change Monitor to SMTP in Pool Setup. The relayd service never starts up. It just complains that there is a syntax error.
Javier
Logged
javier.wong
Newbie
Posts: 9
Karma: 1
Re: Load Balancer - relayd service stopped
«
Reply #4 on:
September 13, 2016, 01:20:31 pm »
OMG! I just changed the Virtual Server mode to Relay and it worked!.
Why cant we not use Redirect for Web Load Balancing?
Logged
javier.wong
Newbie
Posts: 9
Karma: 1
Re: Load Balancer - relayd service stopped
«
Reply #5 on:
September 19, 2016, 09:34:29 am »
If anyone has this problem have a look at
https://github.com/opnsense/core/issues/565
Basically launch the shell and run 'pkg install -f relayd' to force a reinstallaion of relayd.
Logged
franco
Administrator
Hero Member
Posts: 17210
Karma: 1566
Re: Load Balancer - relayd service stopped
«
Reply #6 on:
September 21, 2016, 01:12:35 pm »
Hi Javier,
Thanks for checking back. I tested your config, it works fine. So did the package reinstall solve this completely?
Cheers,
Franco
PS: You can also reinstall packages with the click of a button from the firmware GUI page (tab packages).
Logged
javier.wong
Newbie
Posts: 9
Karma: 1
Re: Load Balancer - relayd service stopped
«
Reply #7 on:
September 30, 2016, 06:44:58 pm »
Hi Franco,
Yeap so far so good. Gonna try upgrading to the latest build now. Will report it it breaks again. Thanks!
Javier
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
16.1 Legacy Series
»
[SOLVED] Load Balancer - relayd service stopped