opnsense port [Lan] aint working anymore

[process]

I've previously changed the default ip on opnSense from 192.168.1.1 to 192.168.1.19 trough the installation wizard.
Now I wanted to change it again, so I changed it directly trough the interface [Lan] row where it said "192.168.1.19" to "192.168.5.19".
After that I can't "find" opnSense trough the url anymore and that port only gives me an "unidentified network" when connecting to it.

If I connect directly to my opnSense hardware (hdmi) and starts it up, it does say when it list my interfaces that the lan ip is 192.168.5.19. I don't really know how to continue on this, is it possible to reset the lan ip's to default or something?

I tried to login but it said something that it was unable to do that trough this environment (or something similar). My admin user is disabled..

[bartjsmit]

You can set the interface IP addresses through the console

[process]

Isn't it the console? Im new a opnsense so I might missunderstand but I'm not at the browser..

You can set the interface IP addresses through the console

If I connect directly to my opnSense hardware (hdmi) and starts it up, it does say when it list my interfaces that the lan ip is 192.168.5.19. I don't really know how to continue on this, is it possible to reset the lan ip's to default or something?

I tried to login but it said something that it was unable to do that trough this environment (or something similar). My admin user is disabled..

[Patrick M. Hausen]

You need to configure your PC to an IP address in the 192.168.5.x/24 network to access the web interface again.

[process]

You need to configure your PC to an IP address in the 192.168.5.x/24 network to access the web interface again.

Awesome it works! Thanks!! :)