[Solved] WAN/DHCP go down until web GUI is accessed

« previous next »

Print

Pages: 1 [2]

Author Topic: [Solved] WAN/DHCP go down until web GUI is accessed (Read 3897 times)

axsdenied

Full Member
Posts: 199
Karma: 9

Re: WAN/DHCP go down until web GUI is accessed

« Reply #15 on: September 20, 2022, 06:27:44 pm »

it almost sounds like the box is sleeping and for whatever reason, hitting port 80 wakes it up?

Logged

OPNsense 24.7.7 running on:
Dell Optiplex 3050
Intel I5-7600 @ 3.5Ghz (4 Cores)
Intel I350-T4 Nic
8G DDR4
256G SSD

HASNOGAME

Newbie
Posts: 9
Karma: 0

Re: WAN/DHCP go down until web GUI is accessed

« Reply #16 on: October 11, 2022, 03:48:25 am »

Quote from: axsdenied on September 20, 2022, 06:27:44 pm

it almost sounds like the box is sleeping and for whatever reason, hitting port 80 wakes it up?

Pretty sure you figured it out with this! Cheers for the tip.

For anyone who may stumble upon this thread:

It seems the issue was due to a setting tucked away in the BIOS. For anyone experiencing weird outages on an HP Z400:

Go into your BIOS using F9 on initial power-on
Go to the Power tab
Select OS Power Management then press Enter
Select Idle Power Savings and change it from Extended to Standard

Assuming it wasn't an act of God this was the only change I made to my setup since I stopped having sudden dropouts.

« Last Edit: October 11, 2022, 03:50:08 am by HASNOGAME »

Logged

Print

Pages: 1 [2]

« previous next »