Unable to ping devices on new VLAN

[FullyBorked]

This should be an easy one, but I'm struggling.  I had 2 physical interfaces, LAN and DMZ.  These talk without issue.  I recently setup two VLANs 10 & 11 and they are on the physical LAN interface.  Devices on the VLANs can communicate with each other, and can get to the internet without issue.   But trying to ping any device outside of their VLAN fails.  I have an LAN to * and a VLAN to * respectively.  I see allowed packets in the firewall but just can't get a reply.  My first thought was a firewall issue, but that wasn't it.  I've messed with this for longer than I am willing to admit.  What tiny thing am I missing that's going to make me feel dumb once I realize it? 

The only other oddity is that when I do a trace I get a hope on my external IP, like it's trying to route the traffic out the WAN instead of to the VLAN interface. 

[FullyBorked]

NVM it works now /shrug I have no idea why.  Mods feel free to delete this post.   

[rhubarb]

If you happened to put anything in the Gateway on the Pass Rule, it will forward traffic to the gateway rather than route the traffic locally.

[FullyBorked]

If you happened to put anything in the Gateway on the Pass Rule, it will forward traffic to the gateway rather than route the traffic locally.

Ah, good info, I did have my gateway fail over group in the gateway field.

Sent from my IN2025 using Tapatalk