Wireguard with Mullvad VPN

Started by ooompa, February 16, 2021, 08:50:07 AM

Previous topic - Next topic
For the past few days I have struggled to complete the setup and finally got to the point where I am connected to server I am supposed to, but something isn't right.

1. Per Mullvad's website I am leaking DNS. Under "Leaking DNS servers", it shows both Mullvad's DNS and 1 or 2 of my local IP's DNS addresses.
2. There is constant packet loss (3-10%) displayed in the gateway table in the dashboard menu
3. Some websites, including all of Google, don't load.

Thanks for help.

Not sure how you have configured your setup, but this may help: https://forum.opnsense.org/index.php?topic=21205.msg99309#msg99309

I tried to set it up using auto-populated public and private keys and it didn't work for some reason. Then I used Mullvad's public and private key pair and it worked. I mean as-is, with DNS not working right.

I will go through your guide and try to set it up like you. And report back.

Thanks!

I've never used Mullvad myself but based on their Linux script ( https://mullvad.net/media/files/mullvad-wg.sh ) there is an API for uploading your public key and getting the endpoint info. Alternatively they may also have a web interface for managing keys on your account

I am still failing :(

Yes, I have used their pair of keys, not the OPNsense's own generated keys (there was no connection whatsoever then).

Should I post the screenshots of my setup for discussion?

Quote from: ooompa on February 16, 2021, 05:13:07 PM
I tried to set it up using auto-populated public and private keys and it didn't work for some reason. Then I used Mullvad's public and private key pair and it worked. I mean as-is, with DNS not working right.

I will go through your guide and try to set it up like you. And report back.

Thanks!
I don't think your DNS leak is a Key problem.
When the keys are okay - the connection is up
If not it's down.

I think you are routing stuff wrong (not over the vpn).

Please show your fw rules, and gateway config

And a network plan please :)
(Unoffial Community) OPNsense Telegram Group: https://t.me/joinchat/0o9JuLUXRFpiNmJk

Yeah, I keep trying different guides to fix it and now the connection is down altogether. I bet the config is messed up somewhere. I am very new to this and it looks like about 8 screens have to be set just right to make it work.

I am getting my internet through DSL modem, which is bridged to a thin client running OPNsense and it handles the PPPOE login. Then it goes to a managed switch and to an AP.

Hopefully these are all you will need. I am not worried about my keys as I will change them once this is running.













Does the Wireguard key exchange work (connection up)?
(Unoffial Community) OPNsense Telegram Group: https://t.me/joinchat/0o9JuLUXRFpiNmJk

February 19, 2021, 09:54:02 PM #8 Last Edit: February 19, 2021, 10:38:57 PM by ooompa
Not sure if that proves it, but there is a key under the handshakes tab.

wg0   01KgzQY+pT7Q+GPUa1ijj0YgdN5owMaK9ViRZO4dIWo=   1613767992

Gateway is offline and shows 100% packet loss.

Those firewall/NAT rules look a bit confused to me. Explain what networks you have locally and what you are trying to achieve with them over WG

I also still think the setup is odd in terms of having the same keys locally and on the endpoint

For testing purposes and when I have to use WAN connection, I have some of my devices with separate rules to bypass the VPN.

Then everything else goes to VPN.

Not sure if it's set up right. Feel free to criticize :)

That still doesn't tell me what local networks you have

Just 1 network, LAN. 192.168.10.x

And you want to send all external traffic from that LAN network down the tunnel, or only from some hosts in that network?

All traffic, except for Roku. I also want to be able to quickly disable VPN on particular device.