Announce: new OPNsense community repository

[mimugmail]

Looks like the service started up just fine after it was enabled. Turned down my old, physical pi-hole device yesterday. Thank you for your work on this!

Nice   

[miruoy]

I finally got AdGuardHome working as an opnsense plugin. Grab it from here: https://www.routerperformance.net/opnsense-repo/

It's still lacking status view, but after install and enabling it's available via port 3000 (if no other service listens to it).

Good work. Been running it as first-in-chain dns on client subnet for a couple of days now.

Not sure if you're aware but the plugin does not seem to run on boot. I presume this is related to the service status which is not working as well.

Could you propose a workaround or do you suspect it might be caused by my environment?

Code: [Select]

dmesg.boot:

---<>---
Copyright (c) 2013-2019 The HardenedBSD Project.
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RELEASE-p12-HBSD #0  0857355c1c2(stable/20.7)-dirty: Mon Jan 18 18:12:55 CET 2021
    root@sensey:/usr/obj/usr/src/amd64.amd64/sys/SMP amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(vga): text 80x25
HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000).
CPU: Intel(R) Celeron(R) CPU 3865U @ 1.80GHz (1799.99-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x806e9  Family=0x6  Model=0x8e  Stepping=9
  Features=0x1f83fbff
  Features2=0xcffaa223
  AMD Features=0x2c100800
  AMD Features2=0x121
  Structured Extended Features=0x944683
  Structured Extended Features2=0x4
  Structured Extended Features3=0xac000400
  XSAVE Features=0xf
  IA32_ARCH_CAPS=0x48
  AMD Extended Feature Extensions ID EBX=0x1001000
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
Hypervisor: Origin = "KVMKVMKVM"
real memory  = 3264217088 (3113 MB)
avail memory = 3125776384 (2980 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table:
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
ioapic0  irqs 0-23 on motherboard
Launching APs: 1
wlan: mac acl policy registered
random: entropy device external interface
kbd1 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
000.000052 [4336] netmap_init               netmap: loaded module
[ath_hal] loaded
nexus0
vtvga0:  on motherboard
cryptosoft0:  on motherboard
acpi0:  on motherboard
acpi0: Power Button (fixed)
cpu0:  on acpi0
atrtc0:  port 0x70-0x71,0x72-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0
pcib0:  port 0xcf8-0xcff on acpi0
pci0:  on pcib0
isab0:  at device 1.0 on pci0
isa0:  on isab0
atapci0:  port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc1e0-0xc1ef at device 1.1 on pci0
ata0:  at channel 0 on atapci0
ata1:  at channel 1 on atapci0
pci0:  at device 1.3 (no driver attached)
vgapci0:  mem 0xfd000000-0xfdffffff,0xfebd0000-0xfebd0fff at device 2.0 on pci0
vgapci0: Boot video device
virtio_pci0:  port 0xc0c0-0xc0df mem 0xfebd1000-0xfebd1fff,0xfe000000-0xfe003fff irq 11 at device 3.0 on pci0
vtnet0:  on virtio_pci0
vtnet0: Ethernet address: 52:54:00:a7:1b:68
vtnet0: netmap queues/slots: TX 1/256, RX 1/128
000.000760 [ 447] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
uhci0:  port 0xc0e0-0xc0ff irq 11 at device 4.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1:  port 0xc100-0xc11f irq 10 at device 4.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2:  port 0xc120-0xc13f irq 10 at device 4.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0:  mem 0xfebd2000-0xfebd2fff irq 11 at device 4.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
virtio_pci1:  port 0xc080-0xc0bf mem 0xfebd3000-0xfebd3fff,0xfe004000-0xfe007fff irq 10 at device 5.0 on pci0
virtio_pci2:  port 0xc000-0xc07f mem 0xfebd4000-0xfebd4fff,0xfe008000-0xfe00bfff irq 10 at device 6.0 on pci0
vtblk0:  on virtio_pci2
vtblk0: 16384MB (33554432 512 byte sectors)
virtio_pci3:  port 0xc140-0xc15f mem 0xfe00c000-0xfe00ffff irq 11 at device 7.0 on pci0
vtballoon0:  on virtio_pci3
virtio_pci4:  port 0xc160-0xc17f mem 0xfebd5000-0xfebd5fff,0xfe010000-0xfe013fff irq 11 at device 8.0 on pci0
vtnet1:  on virtio_pci4
vtnet1: Ethernet address: 52:54:00:43:a3:2f
vtnet1: netmap queues/slots: TX 1/256, RX 1/128
000.001313 [ 447] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
virtio_pci5:  port 0xc180-0xc19f mem 0xfebd6000-0xfebd6fff,0xfe014000-0xfe017fff irq 10 at device 9.0 on pci0
vtnet2:  on virtio_pci5
vtnet2: Ethernet address: 52:54:00:f0:0d:26
vtnet2: netmap queues/slots: TX 1/256, RX 1/128
000.001314 [ 447] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
virtio_pci6:  port 0xc1a0-0xc1bf mem 0xfebd7000-0xfebd7fff,0xfe018000-0xfe01bfff irq 10 at device 10.0 on pci0
vtnet3:  on virtio_pci6
vtnet3: Ethernet address: 52:54:00:54:7f:5f
vtnet3: netmap queues/slots: TX 1/256, RX 1/128
000.001315 [ 447] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
ahci0:  port 0xc1c0-0xc1df mem 0xfebd8000-0xfebd8fff irq 11 at device 11.0 on pci0
ahci0: AHCI v1.00 with 6 1.5Gbps ports, Port Multiplier not supported
ahcich0:  at channel 0 on ahci0
ahcich1:  at channel 1 on ahci0
ahcich2:  at channel 2 on ahci0
ahcich3:  at channel 3 on ahci0
ahcich4:  at channel 4 on ahci0
ahcich5:  at channel 5 on ahci0
acpi_syscontainer0:  on acpi0
acpi_syscontainer1:  port 0xaf00-0xaf0b on acpi0
acpi_syscontainer2:  port 0xafe0-0xafe3 on acpi0
acpi_syscontainer3:  port 0xae00-0xae13 on acpi0
atkbdc0:  port 0x60,0x64 irq 1 on acpi0
atkbd0:  irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0:  irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
fdc0:  port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
orm0:  at iomem 0xe8000-0xeffff pnpid ORM0000 on isa0
vga0:  at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
attimer0:  at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
fdc0: No FDOUT register!
Timecounters tick every 10.000 msec
ugen2.1:  at usbus2
ugen3.1:  at usbus3
uhub0:  on usbus2
ugen0.1:  at usbus0
uhub1:  on usbus3
ugen1.1:  at usbus1
uhub2:  on usbus0
uhub3:  on usbus1
Trying to mount root from ufs:/dev/ufs/OPNsense [rw,noatime]...
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered

[mimugmail]

I will have a look, thx

[mrancier]

I have the same issue.  Plugin will not start AdguardHome at boot, have to start it manually.

[mimugmail]

Please check for updates again. I updated to 1.3 with full service control

[mrancier]

Thank you so much for the quick response, MiggityMuggity.  Will try this update when I get back home later.

[miruoy]

Please check for updates again. I updated to 1.3 with full service control

I can confirm that both the service status and starting on boot is solved with this new release.

Your quick response and action is very much appreciated!

[mimugmail]

If anyone would like to test if AGH works with LibreSSL tool, I'd be very thankful

[miruoy]

If anyone would like to test if AGH works with LibreSSL tool, I'd be very thankful

I'm running it on LibreSSL

[mimugmail]

Hooray for boobies .. eh .. go-lang

[miruoy]

Beer & Boobies for mimugmail

[mimugmail]

I added plugins for Elasticsearch and Kibana now.

[juliocbc]

Nice work Michael! Kudos!!

Can you share the steps that you followed to build a plugins-only repository ?

[mimugmail]

pkg repo /folder/of/plugins

Or what do you mean?

[juliocbc]

Simple as that?? :-)

I tried, but doesn't be like the poudriere repo dir structure.

Am I missing something?