Author Topic: Interfaces: Settings (Read 1081 times)

hushcoden · « **on:** September 25, 2020, 01:25:23 pm »

I'd like to know what the default value is (enabled or disabled) for the VLAN Hardware Filtering.

Thanks.

franco · « **Reply #1 on:** September 25, 2020, 01:29:07 pm »

The "leave default" default is not to trigger the disable / enable at all. Some earlier FreeBSD versions had issues when toggling the flag even if it was not transitioning from enabled to disable or disabled to enabled. Enabled/disabled defaults may vary per driver.

Cheers,
Franco

Author Topic: Interfaces: Settings (Read 1081 times)

hushcoden

Interfaces: Settings

franco

Re: Interfaces: Settings