Trex with OPNsense

« previous next »

Print

Pages: [1]

Author Topic: Trex with OPNsense (Read 1605 times)

subham1501

Newbie
Posts: 3
Karma: 0

Trex with OPNsense

« on: May 30, 2020, 07:43:46 am »

Hi Everyone,

I am Using Trex Traffic Generator to Push the Traffic on Port_1 and Receive from Port_2, But unfortunately i am unable to receive my traffic which i am send to the port_1.

Firewall Rules:
BOTH ports are allow everything.

Still my traffic is dropped on port_1 it self.

« Last Edit: May 30, 2020, 07:46:36 am by subham1501 »

Logged

mimugmail

Hero Member
Posts: 6766
Karma: 494

Re: Trex with OPNsense

« Reply #1 on: May 30, 2020, 09:05:52 am »

Try Floating rule with Accept any any?

Logged

WWW: www.routerperformance.net
Support plans: https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German): https://opnsense.max-it.de/

subham1501

Newbie
Posts: 3
Karma: 0

Re: Trex with OPNsense

« Reply #2 on: May 30, 2020, 02:35:55 pm »

Thanks, After applying rules in Floating Rules, Ping and Arp is working from Trex Traffic Generator side.
When I am sending the 1GE traffic, same thing is happening all ( IPv4 Packets) getting dropped in port.

Logged

mimugmail

Hero Member
Posts: 6766
Karma: 494

Re: Trex with OPNsense

« Reply #3 on: May 30, 2020, 02:48:34 pm »

Is this message from application or where? It's not blocked from pf

Logged

WWW: www.routerperformance.net
Support plans: https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German): https://opnsense.max-it.de/

subham1501

Newbie
Posts: 3
Karma: 0

Re: Trex with OPNsense

« Reply #4 on: May 30, 2020, 03:00:05 pm »

Okay if it was not blocked from pf then why traffic dropped is happening ??

Check In my snaps of traffic generator TX 3.22 Gb to RX 0.0 Gb

Logged

Print

Pages: [1]

« previous next »