Author Topic: [SOLVED] Traffic Shaper remains active when deactivated (Read 6868 times)

kingfisher77 · « **on:** September 28, 2015, 06:33:20 pm »

We have a weired behaviour with traffic shaping. After disabling the pipe (1MBit/s per source) the traffic remains shaped. After a reboot of the appliance the behaviour like it was bevor using Traffic Shaper is back.

If we delete the rule or override it with a higher value the higher value is reached. But the maximum traffic which we have after a reboot is never reached (100/7Mbit/s).

Could this be a bug?

OPNsense 15.7.14-amd64

AdSchellevis · « **Reply #1 on:** September 28, 2015, 09:05:27 pm »

yes, it's a bug, it will be fixed in the next release.
The ipfw rules aren't flushed when disabled in the current version, a workaround for this version is to add an empty pipe and apply the rules again.

More info: https://github.com/opnsense/core/issues/407

kingfisher77 · « **Reply #2 on:** September 28, 2015, 09:52:53 pm »

Great - thanks.

franco · « **Reply #3 on:** September 30, 2015, 08:22:10 am »

Fix is being shipped with 15.7.15. Enjoy.

kingfisher77 · « **Reply #4 on:** September 30, 2015, 08:30:56 am »

Yes, it works!

Thank you.

Author Topic: [SOLVED] Traffic Shaper remains active when deactivated (Read 6868 times)

kingfisher77

[SOLVED] Traffic Shaper remains active when deactivated

AdSchellevis

Re: Traffic Shaper remains active when deactivated

kingfisher77

Re: Traffic Shaper remains active when deactivated

franco

Re: Traffic Shaper remains active when deactivated

kingfisher77

Re: [SOLVED] Traffic Shaper remains active when deactivated