Maltrail consuming a lot of CPU after 19.7.3

[tusc]

I recently upgraded today and noticed maltrail's senor has 4 processes running and load is above 5. Is this normal?

Code: [Select]

@OPNsense:/usr/local/etc/rc.d # ps axu | grep maltrail
root    21811 100.3 19.8  717304 704352  -  S    19:56    4:22.30 python2.7 /usr/local/share/maltrail/sensor.py
root    96015  34.4 19.8  713732 703972  -  R    19:58    1:10.19 python2.7 /usr/local/share/maltrail/sensor.py
root     2744  32.5 19.8  713852 704220  -  S    19:58    1:11.61 python2.7 /usr/local/share/maltrail/sensor.py
root    24134  32.1 19.8  713596 703792  -  S    19:58    1:09.22 python2.7 /usr/local/share/maltrail/sensor.py
root    55286   0.0  0.8   40668  26844  -  S    19:26    0:02.11 python2.7 /usr/local/share/maltrail/server.py


Code: [Select]

root@OPNsense:/usr/local/etc/rc.d # top -bHS
last pid: 78026;  load averages:  4.36,  5.04,  5.42  up 0+01:31:43    20:02:23
210 processes: 12 running, 155 sleeping, 43 waiting

Mem: 780M Active, 210M Inact, 538M Wired, 303M Buf, 1817M Free
Swap:


  PID USERNAME   PRI NICE   SIZE    RES STATE   C   TIME    WCPU COMMAND
21811 root        86    0   700M   688M CPU0    0   2:01  47.46% python2.7{python2.7}
21811 root        86    0   700M   688M RUN     0   1:59  47.36% python2.7{python2.7}
96015 root        44    0   697M   687M select  2   1:26  33.40% python2.7{python2.7}
24134 root        44    0   697M   687M CPU2    2   1:25  32.67% python2.7{python2.7}
 2744 root        45    0   697M   688M RUN     3   1:27  32.37% python2.7{python2.7}
   11 root       155 ki31     0K    64K RUN     3  24:49  30.08% idle{idle: cpu3}
   11 root       155 ki31     0K    64K RUN     2  25:12  29.49% idle{idle: cpu2}
   11 root       155 ki31     0K    64K RUN     0  22:51  25.29% idle{idle: cpu0}
   12 root       -92    -     0K   720K CPU3    3  21:53  25.29% intr{irq265: igb1:que 3}
   11 root       155 ki31     0K    64K RUN     1  19:21  20.56% idle{idle: cpu1}
   12 root       -92    -     0K   720K WAIT    2  16:50  18.80% intr{irq259: igb0:que 2}
   12 root       -92    -     0K   720K WAIT    0   3:28   2.39% intr{irq262: igb1:que 0}
   12 root       -92    -     0K   720K RUN     3   1:36   1.95% intr{irq260: igb0:que 3}
   12 root       -92    -     0K   720K WAIT    2   1:37   1.56% intr{irq264: igb1:que 2}
56999 root        22    0 35044K 22400K select  1   0:00   0.39% php-cgi


[tusc]

Well, it looks like it has subsided. Not sure what caused it. Does it normally have that many processes active?

Code: [Select]

root@OPNsense:/usr/local/etc/rc.d # top -bHS
last pid: 80886;  load averages:  0.61,  0.67,  0.85  up 0+02:36:04    21:06:44
207 processes: 6 running, 156 sleeping, 45 waiting

Mem: 486M Active, 501M Inact, 539M Wired, 303M Buf, 1820M Free
Swap:


  PID USERNAME   PRI NICE   SIZE    RES STATE   C   TIME    WCPU COMMAND
   11 root       155 ki31     0K    64K CPU2    2  70:52  92.09% idle{idle: cpu2}
   11 root       155 ki31     0K    64K CPU0    0  66:48  86.96% idle{idle: cpu0}
   11 root       155 ki31     0K    64K RUN     3  70:55  84.47% idle{idle: cpu3}
   11 root       155 ki31     0K    64K CPU1    1  62:52  84.28% idle{idle: cpu1}
24134 root        22    0   697M   688M select  0  11:00   7.28% python2.7{python2.7}
96015 root        21    0   697M   688M CPU1    1  11:00   5.76% python2.7{python2.7}
 2744 root        21    0   698M   688M select  2  10:59   3.56% python2.7{python2.7}
21811 root        21    0   700M   688M bpf     2   9:46   1.86% python2.7{python2.7}
21811 root        21    0   700M   688M bpf     2   9:44   1.86% python2.7{python2.7}
81897 root        52    0 37096K 25328K accept  0   0:02   0.98% php-cgi


[mimugmail]

Maybe downloaded all trails again

[Northguy]

What does your /var/log/maltrail/error.log show? Mine is flooded " with Received unexpected datalink (186) ". Cannot find root cause for it, but this is definitely the rootcause for high CPU load on my device.

[mimugmail]

Does this appear after 0.15 -> 0.16 update?

[Northguy]

Not sure for my case, just noticed it. Meanwhile MT development committed a patch. @mimugmail, is there an advised way to apply the patch to the plugin? I don't think opnsense-patch can be applied to another repo?

[mimugmail]

Which patch do you mean?

[Northguy]

Hi,

Please refer to

https://github.com/stamparm/maltrail/commit/f71c5c7d02d47341f009d3d0f1dbf0ccb63f86ea

[juliocbc]

@mimugmail

Apparently changing from `PROCESS_COUNT` to `USE_MULTIPROCESSING` solved my problem with very high CPU usage.

Makes any sense to you?

ref.: https://github.com/cloudfence/plugins/commit/e878c035a465882d186e5c9181f827b5c21e177d

[juliocbc]

Tests with APU2e4 (quadcore / 4GB RAM) -  OPNsense 19.7.8-amd64

Running with:

-100Mb + 60 Mb WANs
-4 VLANs
-1 Site to Site OpenVPN
-Plugins: Ngnix, Let's encrypt, Proxy (with Cloudfence's Webfilter), haproxy, FTPProxy;
-ARP Table: 51 entries;

Maltrail only with sensor running (We use a dedicated Maltrail Server here) with custom configuration:

Code: [Select]

PROCESS_COUNT 1
#USE_MULTIPROCESSING true
DISABLE_CPU_AFFINITY false
CPU stats (every 3mins) - Load average (1 core): 94%
Memory: 15%

[juliocbc]

Maltrail server stats:

[mimugmail]

Tests with APU2e4 (quadcore / 4GB RAM) -  OPNsense 19.7.8-amd64

Running with:

-100Mb + 60 Mb WANs
-4 VLANs
-1 Site to Site OpenVPN
-Plugins: Ngnix, Let's encrypt, Proxy (with Cloudfence's Webfilter), haproxy, FTPProxy;
-ARP Table: 51 entries;

Maltrail only with sensor running (We use a dedicated Maltrail Server here) with custom configuration:

Code: [Select]

PROCESS_COUNT 1
#USE_MULTIPROCESSING true
DISABLE_CPU_AFFINITY false
CPU stats (every 3mins) - Load average (1 core): 94%
Memory: 15%

Currently maltrail.conf uses fixed $CPU_CORES, shall I make this configurable?

[juliocbc]

Hi Michael!

I've edited jinja2 template to make some tests.

[jds]

This remedy to be fixed for awhile, but now I am back up to high CPU with maltrail.

8212   uwait   37.50%   python3 /usr/local/share/maltrail/sensor.py (python3.7){python3.7}
   49973   CPU3   36.38%   python3 /usr/local/share/maltrail/sensor.py (python3.7){python3.7}
   61436   CPU2   35.60%   /usr/local/sbin/openvpn --config /var/etc/openvpn/client2.conf
   34952   select   34.77%   python3 /usr/local/share/maltrail/sensor.py (python3.7){python3.7}
   23576   select   33.50%   python3 /usr/local/share/maltrail/sensor.py (python3.7){python3.7}
   74367   select   23.78%   /usr/local/bin/suricata -D --netmap --pidfile /var/run/suricata.pid -c /usr/local/etc/suricata/suricata.yaml{W#01-em3}

System is 4core APU, total memory use is only about 20%.

Forgot to mention that I am running 20.1.8

[mimugmail]

Usually this only happens when downloading new feeds after restart ... how long did you wait?