Author Topic: Issues installing 19.7 on APU2D4 (Read 2851 times)

sdyaris · « **on:** August 19, 2019, 08:02:39 pm »

I've had no luck installing 19.7 on my new APU2D4. After the initial menu options it fails right away on script errors trying to format the drive (msata). Finally gave up and installed pfsense on it (no issues with that install).

guest14952 · « **Reply #1 on:** August 19, 2019, 10:29:58 pm »

What´s your firmware version?

If it´s not an v4.9.0.x or the new 4.10 release an upgrade is recommended.

(Downloads on pcengines.github.io )

ruggerio · « **Reply #2 on:** August 20, 2019, 09:58:36 am »

had the same issue, changed usb-stick for installation. worked for me.

sdyaris · « **Reply #3 on:** August 21, 2019, 04:27:22 pm »

Upgraded bios to 4.10.0.0 and redownloaded. 19.7 and ran checksum. Same error Execution of command /sbin/gpart create -s got da0 failed with return code 1

franco · « **Reply #4 on:** August 21, 2019, 05:11:00 pm »

You're installing from USB to USB? And you replaced which USB exactly?

If that was the case just use the nano image and no need to install...

Cheers,
Franco

sdyaris · « **Reply #5 on:** August 21, 2019, 06:10:58 pm »

Nope. But the menu is so messed up it's hard to really tell.

franco · « **Reply #6 on:** August 21, 2019, 06:15:48 pm »

Interesting. I'd love to see screenshots or photos to diagnose.

Cheers,
Franco

Author Topic: Issues installing 19.7 on APU2D4 (Read 2851 times)

sdyaris

Issues installing 19.7 on APU2D4

guest14952

Re: Issues installing 19.7 on APU2D4

ruggerio

Re: Issues installing 19.7 on APU2D4

sdyaris

Re: Issues installing 19.7 on APU2D4

franco

Re: Issues installing 19.7 on APU2D4

sdyaris

Re: Issues installing 19.7 on APU2D4

franco

Re: Issues installing 19.7 on APU2D4