>>> Running build step: vga >>> Running build step: clean >>> Removing vga image >>> Setting up stage in /usr/obj/usr/tools/config/19.1/OpenSSL:amd64 >>> Setting up world in /usr/obj/usr/tools/config/19.1/OpenSSL:amd64/work >>> Setting up kernel in /usr/obj/usr/tools/config/19.1/OpenSSL:amd64/work >>> Extracting packages in /usr/obj/usr/tools/config/19.1/OpenSSL:amd64/work >>> Installing packages in /usr/obj/usr/tools/config/19.1/OpenSSL:amd64/work: os-dyndns opnsense pkg: No packages installed. Nothing to do! Installing pkg-1.10.5_5... Extracting pkg-1.10.5_5: 100% pkg: Cannot open /dev/null:No such file or directory Installing os-dyndns-1.13... Extracting os-dyndns-1.13: 100% pkg: Cannot open /dev/null:No such file or directory Installing opnsense-19.1.4... `-- Installing beep-1.0_1... `-- Extracting beep-1.0_1: 100% `-- Installing bsdinstaller-19.1_1... | `-- Installing cpdup-1.20... | `-- Extracting cpdup-1.20: 100% `-- Extracting bsdinstaller-19.1_1: 100% pkg: Cannot open /dev/null:No such file or directory `-- Installing ca_root_nss-3.42.1... `-- Extracting ca_root_nss-3.42.1: 100% pkg: Cannot open /dev/null:No such file or directory `-- Installing choparp-20150613... `-- Extracting choparp-20150613: 100% `-- Installing cpustats-0.1... `-- Extracting cpustats-0.1: 100% `-- Installing dhcp6c-20190128... `-- Extracting dhcp6c-20190128: 100% `-- Installing dhcpleases-0.2... `-- Extracting dhcpleases-0.2: 100% `-- Installing dnsmasq-2.80_2,1... | `-- Installing nettle-3.4.1_1... | | `-- Installing indexinfo-0.3.1... | | `-- Extracting indexinfo-0.3.1: 100% | | `-- Installing gmp-6.1.2_1... | | `-- Extracting gmp-6.1.2_1: 100% pkg: Cannot open /dev/null:No such file or directory | `-- Extracting nettle-3.4.1_1: 100% pkg: Cannot open /dev/null:No such file or directory `-- Extracting dnsmasq-2.80_2,1: 100% pkg: Cannot open /dev/null:No such file or directory `-- Installing dpinger-3.0... `-- Extracting dpinger-3.0: 100% `-- Installing expiretable-0.6_1... `-- Extracting expiretable-0.6_1: 100% `-- Installing filterlog-0.2... `-- Extracting filterlog-0.2: 100% `-- Installing ifinfo-10.1... `-- Extracting ifinfo-10.1: 100% `-- Installing flock-2.30.1... `-- Extracting flock-2.30.1: 100% `-- Installing flowd-0.9.1_3... | `-- Installing python27-2.7.15... | | `-- Installing openssl-1.0.2r,1... | | `-- Extracting openssl-1.0.2r,1: 100% pkg: Cannot open /dev/null:No such file or directory | | `-- Installing readline-7.0.5... | | `-- Extracting readline-7.0.5: 100% pkg: Cannot open /dev/null:No such file or directory | | `-- Installing libffi-3.2.1_3... | | `-- Extracting libffi-3.2.1_3: 100% pkg: Cannot open /dev/null:No such file or directory | `-- Extracting python27-2.7.15: 100% pkg: Cannot open /dev/null:No such file or directory pkg: Cannot open /dev/null:No such file or directory [26/1960]Failed to install the following 1 package(s): ./.pkg/All/opnsense-19.1.4.txzMessage from beep-1.0_1: Speaker sound support: ====================== For PC speaker sound to work you need to be in the operator groupand need r/w permissions to /dev/speaker device.Load kernel module: # kldload speaker Add a user to operator group:% pw groupmod operator -m jerryUncomment the following lines in /etc/devfs.rules file (create itif it doesn't exist): # Allow members of group operator to cat things to the speaker[speaker=10] add path 'speaker' mode 0660 group operatorTo load these new rules add the following to /etc/rc.conf:devfs_speaker_ruleset="speaker"Then restart devfs to load the new rules:% /etc/rc.d/devfs restart Message from ca_root_nss-3.42.1:********************************* WARNING *********************************FreeBSD does not, and can not warrant that the certification authoritieswhose certificates are included in this package have in any way beenaudited for trustworthiness or RFC 3647 compliance.Assessment and verification of trust is the complete responsibility of thesystem administrator. *********************************** NOTE **********************************This package installs symlinks to support root certificates discovery bydefault for software that uses OpenSSL.This enables SSL Certificate Verification by client software without manualintervention. If you prefer to do this manually, replace the following symlinks witheither an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem***************************************************************************Message from dnsmasq-2.80_2,1:*** To enable dnsmasq, edit /usr/local/etc/dnsmasq.conf and *** set dnsmasq_enable="YES" in /etc/rc.conf[.local]*** *** Further options and actions are documented inside*** /usr/local/etc/rc.d/dnsmasq*** SECURITY RECOMMENDATION *** ~~~~~~~~~~~~~~~~~~~~~~~ *** It is recommended to enable the wpad-related options*** at the end of the configuration file (you may need to*** copy them from the example file to yours) to fix*** CERT Vulnerability VU#598349.Message from openssl-1.0.2r,1:Edit /usr/local/openssl/openssl.cnf to fit your needs.Message from python27-2.7.15:===========================================================================Note that some standard Python modules are provided as separate portsas they require additional dependencies. They are available as:bsddb databases/py-bsddbgdbm databases/py-gdbmsqlite3 databases/py-sqlite3tkinter x11-toolkits/py-tkinter===========================================================================*** Error code 70 Stop. make: stopped in /usr/tools
tools /usr/tools 19.1src /usr/src 19.1ports /usr/ports 19.1plugins /usr/plugins 19.1core /usr/core 19.1