VERY VERY strange behavior of 18.1

Started by roli8200, March 05, 2019, 11:55:29 AM

Previous topic - Next topic
Hello

Its about a opnsense 18.1 on a vmware esxi 6.5.

During tests we have noticed that some IP packets are fragmented by 1434 bytes.
To test the maximum MTU the underlying interface can deliver, I exceuted the command:
ifconfig em0 hwfeatures


This causes the interface to crash somehow and come suddenly up again, always with the fixed ip address of: 195.49.42.34
ALWAYS. Tested it three times, with reboots between.
The interface had the originally configured ip of: 10.1.110.251/24
There is absolutely no DHCP Server is in the that network nor on the firewall.

We have no (absolutely no)  relationship in any form to this IP address or the network that belongs to it,
nor with the owner of the network.

I have already experienced many strange, weird and disturbing things with pfsense and opnsense.
Things that contradict any common sense.
This, however, surpasses it by far.




Based on whois, this ip belongs to:

inetnum:        195.49.42.0 - 195.49.42.255
netname:        TOOLPARK-VIACH-NET
descr:          Toolpark Cooperation AG
country:        CH
admin-c:        MS6444-RIPE
tech-c:         MS6444-RIPE
status:         ASSIGNED PA
mnt-by:         AS1836-MNT
created:        2003-10-24T14:59:20Z
last-modified:  2003-10-24T14:59:20Z
source:         RIPE

person:         Markus Schaerer
address:        Toolpark Cooperation AG
address:        Buehlstrasse 1
address:        CH-8125 Zollikerberg
address:        Switzerland
phone:          +41 1 396 26 66
fax-no:         +41 1 396 22 60
nic-hdl:        MS6444-RIPE
mnt-by:         CH-GREEN-MNT
created:        2003-10-24T14:59:17Z
last-modified:  2012-09-29T02:40:14Z
source:         RIPE # Filtered

Would you mind trying at least 18.1.x. Meanwhile 18.7.x and 19.1.x have been out for a while.


Cheers,
Franco

Sorry, I deleted your message by accident. I wanted to respond, but modified instead.

If you want to post again, please do not post what you posted before.


Cheers,
Franco

If you use such methods to suppress unwanted posts, you don't have to talk at all.

I wanted to reply. I made a mistake. I said so. Sorry.


Cheers,
Franco