IPv6 Far Getway

Started by ovv, January 23, 2019, 07:11:30 PM

Previous topic - Next topic
Hello,

I'm looking into setting up IPv6 on an virtualized opnsene @OVH. For IPv4 I need to enable "Far Gateway" as the gateway is outside the subnet and that works fine. For IPv6 the gateway is also outside the subnet (See https://docs.ovh.com/gb/en/dedicated/network-ipv6 ) but I keep getting:

QuoteThe gateway address "xxxx:xxxx:xxxx:xxFF:FF:FF:FF:FF" does not lie within one of the chosen interface's IPv6 subnets.

I'm probably missing a simple thing, I'm fairly new with IPv6 and can't figure out what

Thanks for the help

Hi,

Far gateway doesn't work in IPv6. You need to set your WAN to "include" the gateway in the subnet. Looks like /56.


Cheers,
Franco

Couldn't get it to work even with setting it to /56.
It looks like OVH is doing some weird things with IPv6, not sure if this setup can work

Ok got it. I forgot to allow IPv6 on the firewall.

Is there any plan to allow far gateway for IPv6 in the future ?

From multiple experiments with the BSD IPv6 implementation it looked like the stack refuses to use a gateway that does not lie within its own configured IPv6 subnet. This might be due to the assumption that there is no NAT so everything shall be reachable/attached directly.

In most cases it is better to use a link-local gateway to side-step these issues. But that is for the ISP to decide...

Glad you got it working, though. :)


Cheers,
Franco