Opensense hangs on Proxmox cli filterlog flood fall conection! Web UI not resp..

[John Wick]

Need to create a topic Proxmox + OPNsense success stories + config share.
There is a similar thread on the Natgate forum.

I will continue to try to change the settings of cpu qemu64 / kvm64 / default kvm64 + I will try to run on e1000 + disable memory balooning. I also requested the config from a forum member who successfully works with OPNsense in Proxmox.

The problem is that this error has to wait, it is not clear until the end that causes an error.
I have several old Proliant G7 servers in the Proxmox cluster. I consider in my case it too overhead to allocate the Gate a whole baremetal server.

[John Wick]

I'm really disappointed that error come back again at night in standby mode.

1. Need to try e1000
2. Need to try disable speed step technology

[guest19757]

It's probably time to pinpoint the cause the problem. Did you look at dmesg? Logs?

[John Wick]

How to watch this logs in bsd systems or you means proxmox logs?
with e1000 drivers i have cathch te same error

I think the best way install OPNsense on baremetal server 1/2U with directed hardware nics 1 or 10 Gbe

[guest19757]

Probably a better idea, I'm not aware of Freebsb/KVM bugs that would contribute to freezes, though seem to be more common on this forum.

Regards
H

[Bargemanos]

I had the same this morning. Als a AMD machine, bare metal.
After commanding to clean op log files, the machine went all wierd. Wan connection droped for a moment but came back up.
SSH promting for username but hangs in verifying password.
Console shows firewall logging but cant be stopt by CTRL+C, Quit, Reboot, Restart, CTRL+X etc..

Last resort option was to press the reset button on the machine itself.

Happy to help troubelshoot if this is nessesarry.

[John Wick]

I finde the topic with same problem on netgate forum https://forum.netgate.com/topic/130467/solved-pfsense-2-4-3-halts-with-calcru-messages-in-console
Its conflict of NTP how to set local NTP in the gate?
I steel cant resolve the problem ***sense works but cli canot work wihout pause/stop vm if hours no traffic router get down.
After pause stop vm have calcru error in console.

[John Wick]

Maybe problem with timeconters Need to try need add sysctl kern.timecounter=ACPI-fast in tunables who know?