Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
18.7 Legacy Series
»
{SOLVED} What could be using all my memory?
« previous
next »
Print
Pages: [
1
]
Author
Topic: {SOLVED} What could be using all my memory? (Read 4417 times)
ThePOO
Newbie
Posts: 26
Karma: 3
{SOLVED} What could be using all my memory?
«
on:
October 19, 2018, 11:15:59 pm »
3953 MB RAM capacity.
18.7.4 RAM use was around 908 MB.
18.7.5 was applied and my RAM use jumped up to 3772.
18.7.5_1 was applied and high use of RAM continues , 97% used.
Swap file 99% used. tmpfs at 99%
After a short time the box locks up. After a hard reset OPNsense takes about five minutes to come up then locks up again after a short time.
I get little time to troubleshoot ... any pointers would be appreciated, thanks?
UPDATE: Here is what worked for me ....
I reset OPNsense to factory settings -- then I restored the configuration saved previously.
After the restoration I had to attend to another issue and about 30 minutes later returned. Success!
It all works and my memory use is at 696 MB (17%), 0% swap use., 1% tmpfs
Wish I knew what was eating all the memory? But reset/restore worked like a champ! Me So Happy!
«
Last Edit: October 20, 2018, 02:04:28 am by ThePOO
»
Logged
weust
Hero Member
Posts: 650
Karma: 57
Re: {SOLVED} What could be using all my memory?
«
Reply #1 on:
October 20, 2018, 11:06:23 am »
You don't give a lot of information to work with.
What services do you have enabled, and with what settings?
Logged
Hobbyist at home, sysadmin at work. Sometimes the first is mixed with the second.
ThePOO
Newbie
Posts: 26
Karma: 3
Re: {SOLVED} What could be using all my memory?
«
Reply #2 on:
October 20, 2018, 04:40:36 pm »
Sorry I wasn't more informative in my original post. There just wasn't much time between crashes to collect anything meaningful. And, I had to go look into another problem that was happening at the same time, elsewhere.
I was just looking for the possibility that someone else had a similar circumstance and a quick fix.
While fixing the other pressing issue, I thought about my game plan to fix OPNsense. -- reset to factory settings -- restore my configuration. And that saved my bacon, this time. I tried that once, in past, and it failed miserably and I ended up doing all my configuration, from scratch, over again --- long ago and with pfSense, not with OPNsense.
Everything is up, and is performing EXTREMELY well today, no issues at all.
HEY! Thanks for commenting, I truly do appreciate your taking the time to show interest.
I have no idea why my OPNsense went nuts. My approach to fixing this, this time, because of circumstance --- rip off the bandaid, pour alcohol all over it, and see it I stay conscientious. It worked out ok, this time.
Again, thanks for your response.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
18.7 Legacy Series
»
{SOLVED} What could be using all my memory?