admin gui access from WAN

« previous next »

Print

Pages: [1]

Author Topic: admin gui access from WAN (Read 9904 times)

slugstone

Newbie
Posts: 1
Karma: 0

admin gui access from WAN

« on: February 27, 2015, 06:16:01 am »

It seems I can access the admin GUI from my WAN address by default. I would rather not be able to do this. How do I disable this access?

Logged

franco

Administrator
Hero Member
Posts: 17657
Karma: 1611

Re: admin gui access from WAN

« Reply #1 on: February 27, 2015, 08:26:55 am »

You are probably talking about having it reachable from the LAN through the WAN IP. Try accessing from the WAN port: it does not work. Not even ICMP ping replies by default from there.

Logged

slackadelic

Full Member
Posts: 145
Karma: 9

Re: admin gui access from WAN

« Reply #2 on: February 27, 2015, 02:18:39 pm »

Outside access is disabled by default. I had to create a specific rule to allow access to it from the outside world.

Logged

Lee Sharp

Newbie
Posts: 10
Karma: 3

Re: admin gui access from WAN

« Reply #3 on: February 27, 2015, 05:15:36 pm »

If you really want to you can try to create a block rule on the LAN interface to the WAN IP address. I am not sure what would happen to traffic at that point, however, as it is a very odd configuration.

Logged

Print

Pages: [1]

« previous next »