Author Topic: FRR Plugin Missing logs (Read 11823 times)

zdali · « **on:** April 03, 2021, 02:05:01 am »

Hi,

Subject says it all really.

I've got a fresh install of OPNsense (21.1.4) and the FRR plugin.

Routing->General->Enable enabled
Routing->General->Enable logging enabled.
Routing->General-log level Debug.

Routing->BGP enabled

Routing->Diagnostics->General->Running Configuration shows "logging syslog", however both zebra.conf and bgpd.conf have correct "log syslog debugging".

More importantly, Routing->Diagnostics->Log is completely empty

Am I missing something here?

AbsolutIggy · « **Reply #1 on:** April 06, 2021, 04:19:45 pm »

I didn't activate BGP, but otherwise I see the same problem - no logs at all the routing diagnostics. Makes it difficult to solve my FRR problem..

mimugmail · « **Reply #2 on:** April 06, 2021, 09:04:11 pm »

Can you try disable circular log?

zdali · « **Reply #3 on:** May 09, 2021, 10:55:09 pm »

That did the trick, thanks!

alfrisch · « **Reply #4 on:** December 10, 2021, 08:04:04 am »

I ran into the same problem and wasn't aware where do disable circular logging.

Here is a hint for others:
it is a system option, so go to "System" -> "Settings" -> "Logging" -> first option

and then you need to restart FRR to have logging output

Author Topic: FRR Plugin Missing logs (Read 11823 times)

zdali

FRR Plugin Missing logs

AbsolutIggy

Re: FRR Plugin Missing logs

mimugmail

Re: FRR Plugin Missing logs

zdali

Re: FRR Plugin Missing logs

alfrisch

Re: FRR Plugin Missing logs