OPNsense Forum
Archive => 21.1 Legacy Series => Topic started by: zdali on April 03, 2021, 02:05:01 am
-
Hi,
Subject says it all really.
I've got a fresh install of OPNsense (21.1.4) and the FRR plugin.
Routing->General->Enable enabled
Routing->General->Enable logging enabled.
Routing->General-log level Debug.
Routing->BGP enabled
Routing->Diagnostics->General->Running Configuration shows "logging syslog", however both zebra.conf and bgpd.conf have correct "log syslog debugging".
More importantly, Routing->Diagnostics->Log is completely empty
Am I missing something here?
-
I didn't activate BGP, but otherwise I see the same problem - no logs at all the routing diagnostics. Makes it difficult to solve my FRR problem..
-
Can you try disable circular log?
-
That did the trick, thanks!
-
I ran into the same problem and wasn't aware where do disable circular logging.
Here is a hint for others:
it is a system option, so go to "System" -> "Settings" -> "Logging" -> first option
and then you need to restart FRR to have logging output