Author Topic: Firewall statistics show N/A for most of the rules (Read 3767 times)

JasMan · « **on:** July 19, 2019, 10:19:26 pm »

Hey,

When I switch to the "Inspect" view in the overview of any interfaces firewall rules, most of the statistic columns shows "N/A". Only the NAT and Floating rules shows values for states, packets and bytes.

Do I have to enable something to see the statistics for all rules?

Thanks.

Jas

JasMan · « **Reply #1 on:** July 21, 2019, 01:07:33 pm »

Has nobody else this issue?
Could some of you please confirm then, that the statistics are working fine for you so that I can open an issue. Thank you.

ruffy91 · « **Reply #2 on:** July 21, 2019, 02:12:37 pm »

For me it does not show NA for any rule.
Some are on 0 and 0 bytes because they have never been hit but thats it.

mimugmail · « **Reply #3 on:** July 21, 2019, 02:43:39 pm »

For me also ok, plenty of 0 rules but most important ones look good.

JasMan · « **Reply #4 on:** July 21, 2019, 05:22:04 pm »

Thank you for your responses.

Any idea why I only see N/A?

JasMan · « **Reply #5 on:** August 02, 2019, 06:57:29 am »

Issue opened

https://github.com/opnsense/core/issues/3620

Author Topic: Firewall statistics show N/A for most of the rules (Read 3767 times)

JasMan

Firewall statistics show N/A for most of the rules

JasMan

Re: Firewall statistics show N/A for most of the rules

ruffy91

Re: Firewall statistics show N/A for most of the rules

mimugmail

Re: Firewall statistics show N/A for most of the rules

JasMan

Re: Firewall statistics show N/A for most of the rules

JasMan

Re: Firewall statistics show N/A for most of the rules