Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
19.7 Legacy Series
»
Upgrading on WebIF to 19.7.r1 doesn´t work?
« previous
next »
Print
Pages:
1
2
[
3
]
Author
Topic: Upgrading on WebIF to 19.7.r1 doesn´t work? (Read 16084 times)
franco
Administrator
Hero Member
Posts: 17661
Karma: 1611
Re: Upgrading on WebIF to 19.7.r1 doesn´t work?
«
Reply #30 on:
July 12, 2019, 08:38:22 am »
Funny, now your screenshots show the upgrade went through (19.7.r_1). Does it hang in the 4th screenshot?
The configd issue seemed like a dead end, but I found postfix is asking an interactive question on update which is quite fatal so I removed the offending prompt from the package:
https://github.com/opnsense/ports/commit/40f51c10e51
Cheers,
Franco
Logged
Bytechanger
Full Member
Posts: 239
Karma: 0
Re: Upgrading on WebIF to 19.7.r1 doesn´t work?
«
Reply #31 on:
July 12, 2019, 01:00:36 pm »
Yes,
on switching to VGA it´s installing complete and reboot, but it´s still OLD Version.
Now I try to update again with your changes?
One question:
How can I update/upgrade via SSH?
How can I get the menu (wich is shown on VGA)??
Update option is Nr 12..
Greets
Byte
«
Last Edit: July 12, 2019, 01:04:21 pm by Bytechanger
»
Logged
Bytechanger
Full Member
Posts: 239
Karma: 0
Re: Upgrading on WebIF to 19.7.r1 doesn´t work?
«
Reply #32 on:
July 12, 2019, 04:33:49 pm »
OK, on serial console it update freezes.
Can´t update
Greets
Byte
Logged
Bytechanger
Full Member
Posts: 239
Karma: 0
Re: Upgrading on WebIF to 19.7.r1 doesn´t work?
«
Reply #33 on:
July 14, 2019, 09:04:08 am »
Hi,
now System shows version
OPNsense 19.7.r_1-amd64
but update shows need to upgrade and unlock...
So it isn't complete.
What can i do?
Greets
Byte
Logged
gpb
Full Member
Posts: 234
Karma: 13
Re: Upgrading on WebIF to 19.7.r1 doesn´t work?
«
Reply #34 on:
July 14, 2019, 06:49:56 pm »
Also on "19.7_r1", updates show this version "obsolete" and "19.7r1" (no underscore in name) along with one other package that needs to be reinstalled with version 1.10.5_5 and name "pkg" (looks like package manager). Manual reinstall from the packages tab doesn't do anything (runs, but still indicates needs reinstalled).
Two crash reports were sent.
Logged
HP T730/AMD RX-427BB/8GB/500GB SSD
HP NC365T 4-PORT
franco
Administrator
Hero Member
Posts: 17661
Karma: 1611
Re: Upgrading on WebIF to 19.7.r1 doesn´t work?
«
Reply #35 on:
July 15, 2019, 09:45:17 am »
Your version numbers are off. Also you're seeing what it's supposed to do. Please take the time to read the beginning of this thread where the process for testing RC is explained.
Cheers,
Franco
Logged
Bytechanger
Full Member
Posts: 239
Karma: 0
Re: Upgrading on WebIF to 19.7.r1 doesn´t work?
«
Reply #36 on:
July 15, 2019, 10:12:56 am »
Hi,
I started this thread. But upgrade stocks. I can't upgrade and don't know, what to do.
Greets
Byte
Logged
franco
Administrator
Hero Member
Posts: 17661
Karma: 1611
Re: Upgrading on WebIF to 19.7.r1 doesn´t work?
«
Reply #37 on:
July 15, 2019, 11:51:44 am »
Please wait for the release then. It'll be easier to understand.
Cheers,
Franco
Logged
Bytechanger
Full Member
Posts: 239
Karma: 0
Re: Upgrading on WebIF to 19.7.r1 doesn´t work?
«
Reply #38 on:
July 16, 2019, 08:08:52 am »
I doesn't understand.
Actually my Software isn't complete updated. It's half upgraded.
I need development-state because of wireguard.
Can I go back to production snd than again to dev?
Or how can I upgrade complete?
EDIT: Oh, maybee thats my fault
https://forum.opnsense.org/index.php?topic=13447.0
Additional: How can I start OPNsense -Menu (console menu) over ssh in bash?
Greets
Byte
«
Last Edit: July 16, 2019, 08:28:42 am by Bytechanger
»
Logged
Print
Pages:
1
2
[
3
]
« previous
next »
OPNsense Forum
»
Archive
»
19.7 Legacy Series
»
Upgrading on WebIF to 19.7.r1 doesn´t work?
