1
24.7 Production Series / Re: NAT stops working
« on: August 23, 2024, 06:28:23 pm »
Thanks Dok ......................
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
24.7 Production Series / Re: NAT stops working
« on: August 23, 2024, 03:27:56 pm »
Same here after update 24.7.2 all of my children can't use there console anymore..
Trying to recreate rule etc nothing ...
I installed UPNP, there are ports in it but it doesn't seem to work
No error or log for help :s
Trying to recreate rule etc nothing ...
I installed UPNP, there are ports in it but it doesn't seem to work
No error or log for help :s
3
French - Français / Re: Débutant : IPv6 derrière freebox ultra
« on: August 08, 2024, 09:34:48 am »
Hello
Normalement tu n’as aucune règle à ajouter
Une gateway, linklocal dans le nexthop, une ip static, du RA et basta
Chez moi moi le RA en stateless c'est KO, je suis en assisted avec le préfixe en route
Normalement tu n’as aucune règle à ajouter
Une gateway, linklocal dans le nexthop, une ip static, du RA et basta
Chez moi moi le RA en stateless c'est KO, je suis en assisted avec le préfixe en route
4
24.7 Production Series / Re: Certificate issues with ACME
« on: August 06, 2024, 08:51:52 am »
Yes i'm talking about Trust/certificate
Under the ACME menu the creation process is OK and also can see my new certificat
(Sorry for my Englush)
Under the ACME menu the creation process is OK and also can see my new certificat
(Sorry for my Englush)
5
24.7 Production Series / Certificate issues with ACME
« on: August 01, 2024, 11:43:21 am »
Hi all,
Since the last update (27.4) i'm unable to click on view or download certificate made by ACME plugin (the certificate is OK and successfully created and it is present on the certificate list)
If i click on view and nothing
If i click on download, i can choose, private etc but nothing is downloaded.
Like the cert is not really here lol (sorry for this explantion...)
The only way is to reboot ;s
Any help ?
Since the last update (27.4) i'm unable to click on view or download certificate made by ACME plugin (the certificate is OK and successfully created and it is present on the certificate list)
If i click on view and nothing
If i click on download, i can choose, private etc but nothing is downloaded.
Like the cert is not really here lol (sorry for this explantion...)
The only way is to reboot ;s
Any help ?
7
24.1 Legacy Series / Update/Upgrade issue ?
« on: January 25, 2024, 11:54:36 am »
Hi all,
I'am actualy on 24.1.r_b8, and the update satut say that :
mimugmail repository update completed. 211 packages processed.
All repositories are up to date.
Checking integrity... done (0 conflicting)
Your packages are up to date.
Checking for upgrades (2 candidates): .. done
Processing candidates (2 candidates): .
pkg: libevent has a missing dependency: openssl111
Processing candidates (2 candidates)... done
Checking integrity... done (0 conflicting)
Your packages are up to date.
***DONE***
Then i have an update :
Package name Current version New version Required action Repository
packages N/A 24.1.r1 upgrade OPNsense
But when i try to Ugrade:
***GOT REQUEST TO UPGRADE***
Currently running OPNsense 24.1.r_8 at Thu Jan 25 11:53:55 CET 2024
Fetching packages-24.1.r1-amd64.tar: ........ done
Extracting packages-24.1.r1-amd64.tar... done
Please reboot.
>>> Invoking upgrade script 'squid-plugin.php'
Squid web proxy is not active. Not installing replacement plugin.
>>> Invoking upgrade script 'unbound-duckdb.py'
***DONE***
Any help ?
Already tried to reboot ^^
Thanks
I'am actualy on 24.1.r_b8, and the update satut say that :
mimugmail repository update completed. 211 packages processed.
All repositories are up to date.
Checking integrity... done (0 conflicting)
Your packages are up to date.
Checking for upgrades (2 candidates): .. done
Processing candidates (2 candidates): .
pkg: libevent has a missing dependency: openssl111
Processing candidates (2 candidates)... done
Checking integrity... done (0 conflicting)
Your packages are up to date.
***DONE***
Then i have an update :
Package name Current version New version Required action Repository
packages N/A 24.1.r1 upgrade OPNsense
But when i try to Ugrade:
***GOT REQUEST TO UPGRADE***
Currently running OPNsense 24.1.r_8 at Thu Jan 25 11:53:55 CET 2024
Fetching packages-24.1.r1-amd64.tar: ........ done
Extracting packages-24.1.r1-amd64.tar... done
Please reboot.
>>> Invoking upgrade script 'squid-plugin.php'
Squid web proxy is not active. Not installing replacement plugin.
>>> Invoking upgrade script 'unbound-duckdb.py'
***DONE***
Any help ?
Already tried to reboot ^^
Thanks
8
23.7 Legacy Series / Re: slow download speed on fresh install opensense - Fujitsu S920 - AMD GX-415GA SOC
« on: January 19, 2024, 01:30:31 pm »
I had the same problem because I had forced the mtu on the WAN
since I took it off everything is OK
however I am not with the same provider
since I took it off everything is OK
however I am not with the same provider
9
23.7 Legacy Series / Re: Xbox and PC Nat
« on: August 05, 2023, 08:24:08 pm »
Thx for the guide 
I have the same configuration, but since the laast update it’s ok…
Regards.
I have the same configuration, but since the laast update it’s ok…
Regards.
10
23.7 Legacy Series / Xbox and PC Nat
« on: July 30, 2023, 11:32:36 pm »
Hi all
First sorry for this topic but, just to signal :
It's seem's to be have an issue with port forward or NAT with the last version.
I have 2 xbox and 2 pc at home, all a NAT open etc ...
Since the upgrade to 23.7 rcX, randomly the NAT is stric everywhere, trying to make new rules but nothing work.
Just fresh install with 23.1 with the SAME backup file, and all is working.
It's just for information because i'm not able to troubleshoot or correct, and my sons want to kill me
But if someone have the same issue, i'm curious to know the solution.
PS : sorry for my english.
Regards.
First sorry for this topic but, just to signal :
It's seem's to be have an issue with port forward or NAT with the last version.
I have 2 xbox and 2 pc at home, all a NAT open etc ...
Since the upgrade to 23.7 rcX, randomly the NAT is stric everywhere, trying to make new rules but nothing work.
Just fresh install with 23.1 with the SAME backup file, and all is working.
It's just for information because i'm not able to troubleshoot or correct, and my sons want to kill me
But if someone have the same issue, i'm curious to know the solution.
PS : sorry for my english.
Regards.
11
22.1 Legacy Series / Re: Ad blocking with Unbound - what am I doing wrong?
« on: July 10, 2022, 10:24:45 pm »12
22.1 Legacy Series / Re: Ad blocking with Unbound - what am I doing wrong?
« on: July 09, 2022, 08:49:33 pm »13
22.1 Legacy Series / Re: Router Advertisement
« on: January 26, 2022, 04:34:48 pm »
I had to put them together
14
22.1 Legacy Series / Re: Router Advertisement
« on: January 25, 2022, 03:08:36 pm »
Thanks to you Franco
I try after work.
EDIT :
Ok, i've set the link local as static ipv6 on the WAN
==> not working (lost IPV6 connection)
On the Wan interface i've selected the gateway instead "auto-select"
==> Now all is working
Thanks for your help Franco
I try after work.
EDIT :
Ok, i've set the link local as static ipv6 on the WAN
==> not working (lost IPV6 connection)
On the Wan interface i've selected the gateway instead "auto-select"
==> Now all is working
Thanks for your help Franco
15
22.1 Legacy Series / Re: Router Advertisement
« on: January 25, 2022, 01:20:59 pm »
I do not use IPV6 on "wan"
To my router (bridged mode) i set the "wan" link local (from OPNsense) to the first "nexthop"
On OPNsense i add an IPV6 gateway (linklocal from my routeur)
I set a static ipv6 to the lan interface with the prefix from the first next hop.
And Wan IPV6 is set to "none"
In this configuration i don't have an IPV6 to the wan interface
On 21.7 even IPV6 set to "none" the link local still present
But on 22.1 there no link local if IPV6 is set to "none"
I can add a static IPV6 to wan but is not needed.
To my router (bridged mode) i set the "wan" link local (from OPNsense) to the first "nexthop"
On OPNsense i add an IPV6 gateway (linklocal from my routeur)
I set a static ipv6 to the lan interface with the prefix from the first next hop.
And Wan IPV6 is set to "none"
In this configuration i don't have an IPV6 to the wan interface
On 21.7 even IPV6 set to "none" the link local still present
But on 22.1 there no link local if IPV6 is set to "none"
I can add a static IPV6 to wan but is not needed.