31
20.1 Legacy Series / Re: 20.1.r_6
« on: January 27, 2020, 12:57:28 pm »
yep that fixed it 
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
32
20.1 Legacy Series / Re: 20.1.r_6
« on: January 27, 2020, 12:50:53 pm »
ok tried that
Then set GUI to Production
Requested an upgrade
Got this
***GOT REQUEST TO UPGRADE: maj***
Fetching packages-20.1.r1-OpenSSL-amd64.tar: ...................................................................... done
Fetching base-20.1.r1-amd64.txz: .. failed, no signature found
***DONE***
Then set GUI to Production
Requested an upgrade
Got this
***GOT REQUEST TO UPGRADE: maj***
Fetching packages-20.1.r1-OpenSSL-amd64.tar: ...................................................................... done
Fetching base-20.1.r1-amd64.txz: .. failed, no signature found
***DONE***
33
20.1 Legacy Series / 20.1.r_6
« on: January 27, 2020, 11:16:28 am »
As per subject line. I was running dev versions of 20.1
Switch back to Production in GUI and did the upgrade
My console is showing
OPNsense 20.1.r_6-amd64
FreeBSD 11.2-RELEASE-p16-HBSD
OpenSSL 1.1.1d 10 Sep 2019
Is that right ? was expecting rc1
Switch back to Production in GUI and did the upgrade
My console is showing
OPNsense 20.1.r_6-amd64
FreeBSD 11.2-RELEASE-p16-HBSD
OpenSSL 1.1.1d 10 Sep 2019
Is that right ? was expecting rc1
34
19.7 Legacy Series / Re: [Solved] Sonos on VLANS
« on: January 15, 2020, 04:22:28 pm »
tested the plugin in test and now production and works perfect nice smooth install process
35
19.7 Legacy Series / Re: [Solved] Sonos on VLANS
« on: January 10, 2020, 11:11:33 pm »
@marjohn I'm waiting for you to read my last email re /etc/rc.conf.d/
36
19.7 Legacy Series / Re: [Solved] Sonos on VLANS - PIMD
« on: January 09, 2020, 07:11:28 pm »
@skywalker007
I can't say if this will work at the same time as IGMPproxy because I haven't tried it
But when I tried to run PIMD and IGMPProxy at the same time PIMD complained
When I tried udp-broadcast-relay-redux with PIMD it worked so my suspicion is udp-broadcast-relay-redux will work with IGMPproxy
But only one way to really know :-)
I can't say if this will work at the same time as IGMPproxy because I haven't tried it
But when I tried to run PIMD and IGMPProxy at the same time PIMD complained
When I tried udp-broadcast-relay-redux with PIMD it worked so my suspicion is udp-broadcast-relay-redux will work with IGMPproxy
But only one way to really know :-)
37
19.7 Legacy Series / Re: [Solved] Sonos on VLANS - PIMD
« on: January 06, 2020, 01:22:45 pm »
Yes confirmed this one allows both Sonos and SkyQ to work together which PIMD didn't seem to handle
38
French - Français / Re: Fibre Orange - configuration opnsense
« on: January 02, 2020, 05:20:25 pm »
J'ai écrit le guide original mais je n'ai pas eu la chance de le mettre à jour. La clé est de changer l'option-90 au nouveau format comme expliqué ici.
https://lafibre.info/remplacer-livebox/cacking-nouveau-systeme-de-generation-de-loption-90-dhcp/
https://lafibre.info/remplacer-livebox/cacking-nouveau-systeme-de-generation-de-loption-90-dhcp/
39
19.7 Legacy Series / Re: [Solved] Sonos on VLANS - PIMD
« on: December 31, 2019, 02:31:28 pm »
Good catch - just amended the post incase others read it later
40
19.7 Legacy Series / Re: [Solved] Sonos on VLANS - PIMD
« on: December 31, 2019, 12:32:53 pm »
cool I have it manually installed on 20.1.b_32 and I'm happy to keep a manual install until/if the plugin appears
Would be nice to have something that is running on my firewall as an official plugin though :-)
Would be nice to have something that is running on my firewall as an official plugin though :-)
41
19.7 Legacy Series / Re: [Solved] Sonos on VLANS - PIMD
« on: December 31, 2019, 11:39:05 am »
HI, @mimugamail do you need anything else from me for the plugin creation ?
42
19.7 Legacy Series / Re: [Solved] Sonos on VLANS - PIMD
« on: December 29, 2019, 10:22:00 am »
Lol .... well you did catch my mistakes quickly
43
19.7 Legacy Series / Re: [Solved] Sonos on VLANS - PIMD
« on: December 29, 2019, 09:50:31 am »
Sure not sure what level of detail you want so here goes
I run the following VLANs
1 - Trusted devices
10 - TV (set top boxes and TVs)
20 - IP cameras
30 - IOT (Sonos, Alexa, home automation)
1003 - Guest Wi-Fi
I want to be able to control Sonos on VLAN 30 from VLAN 1
Installed the pimd package
#pkg add http://pkg.freebsd.org/FreeBSD:11:amd64/quarterly/All/pimd-2.3.2.txz
By default pimd runs on all interfaces so I edited /usr/local/etc/pimd.conf to disable those I’m not interested in
phyint pppoe0 disable
phyint igb1_vlan1003 disable
phyint igb1_vlan10 disable
phyint igb1_vlan20 disable
phyint ovpns1 disable
Now to ensure pimd starts after a reboot
create /etc/rc.conf.d/pimd
which contains one line
pimd_enable="YES"
I have my firewall rules open at the minute between VLANs until I got this working but I'm now about to start restricting them just to the Sonos ports
I run the following VLANs
1 - Trusted devices
10 - TV (set top boxes and TVs)
20 - IP cameras
30 - IOT (Sonos, Alexa, home automation)
1003 - Guest Wi-Fi
I want to be able to control Sonos on VLAN 30 from VLAN 1
Installed the pimd package
#pkg add http://pkg.freebsd.org/FreeBSD:11:amd64/quarterly/All/pimd-2.3.2.txz
By default pimd runs on all interfaces so I edited /usr/local/etc/pimd.conf to disable those I’m not interested in
phyint pppoe0 disable
phyint igb1_vlan1003 disable
phyint igb1_vlan10 disable
phyint igb1_vlan20 disable
phyint ovpns1 disable
Now to ensure pimd starts after a reboot
create /etc/rc.conf.d/pimd
which contains one line
pimd_enable="YES"
I have my firewall rules open at the minute between VLANs until I got this working but I'm now about to start restricting them just to the Sonos ports
44
19.7 Legacy Series / Re: Experience with Sonos over multiple VLANs
« on: December 29, 2019, 12:48:51 am »45
19.7 Legacy Series / Re: Sonos on VLANS - PIMD
« on: December 28, 2019, 11:45:17 pm »
Yes there is and I missed that completely
Added a file pmid to /etc/rc.conf.d with the line
pmid_enabled="YES"
Now it is running after a reboot and all is working perfectly
Thanks for the quick guidance, as always the support on this forum is just first class.
I guess the only downside of this approach is having to reconfigure post upgrades as I assume the conf files will be overwritten
Added a file pmid to /etc/rc.conf.d with the line
pmid_enabled="YES"
Now it is running after a reboot and all is working perfectly
Thanks for the quick guidance, as always the support on this forum is just first class.
I guess the only downside of this approach is having to reconfigure post upgrades as I assume the conf files will be overwritten